如果出现“LOW OIL LEVEL”(滑油油面低)ECAM咨询信息,APU是否可用()
第1题:
Leakage of hydraulic fluid from around the shaft of a hydraulic motor may be caused by ______.
A.permanent loss of pump suction
B.worn shaft seals
C.high level in the oil sump
D.low motor RPM
第2题:
当出现OIL CLOG信息时,是否还有滑油进入发动机()
第3题:
A.Low level is monitored on the drain tank and header tank.
B.If there is high differential the filters pressure across the circulating
pumps is alarmed
C.The lubricating oil purifier cannot take oil from the drain tank
D.If the sea water pressure falls, this also operates an alarm
第4题:
怎样去确认发动机上的IDG(整体驱动发电机)滑油油量?()
第5题:
ECAM上滑油温度是什么滑油温度()?
第6题:
当绿系统液压油发生渗漏后,油面低于ECAM白色指示线以后,哪个活门会关闭?()
第7题:
IDG滑油出口温度超温到多少度会出现ECAM电源页自动跳出,IDG滑油温度指示闪烁()
第8题:
Overheating of the hydraulic fluid in an electro-hydraulic anchor windlass can result from a/an( ).
A.overload on the pump motor
B.low fluid level in the reservoir
C.low fluid viscosity around the shaft seal
D.high oil level in the sump
第9题:
控制面板显示EnvTem、GeaOilLev表示:()
第10题:
(EMB145)咨询信息“E1 OIL IMP BYP”显示在EICAS上表示()