思科认证考试
Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）A、 QoS must be set to PlatinumB、 WMM must be enabledC、 QoS must be set to GoldD、 TSPEC must be disabledE、 Cisco Compatible Extensio
题目
Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）
- A、 QoS must be set to Platinum
- B、 WMM must be enabled
- C、 QoS must be set to Gold
- D、 TSPEC must be disabled
- E、 Cisco Compatible Extensions must be disabled
参考答案和解析
相似问题和答案
第1题：
A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）
A. You must set each end of the trunk line to IEEE 802.1e encapsulation.
B. You must set the same VTP management domain name on both switches.
C. You must set all ports on the two switches as access ports.
D. You must configure one of the switches as a VTP server.
E. You must use a rollover cable to connect the two switches.
第2题：
A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.
B. The VTP management domain name of both switches must be set the same.
C. All ports on both the switches must be set as access ports.
D. One of the two switches must be configured as a VTP server.
E. A rollover cable is required to connect the two switches together.
F. A router must be used to forward VTP traffic between VLANs.
第3题：
A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).
A．You must set each end of the trunk line to IEEE 802.1e encapsulation.
B．You must set the same VTP management domain name on both switches.
C．You must set all ports on the two switches as access ports.
D．You must configure one of the switches as a VTP server.
E．You must use a rollover cable to connect the two switches.
解析：Explanation:ThefollowingdescribeswhatisneededinordertocorrectlysetupVTP:IncorrectAnswers:A.TheencapsulationcanbeeitherISLor802.1Q,andneedtomatchateachendofthetrunk.C.PortsmustonlybeassignedtoVLANS.Oncethatisdoneandthetrunkisupandrunning,theVLANinformationwillbepassedbetweentheswitches.E.AregularCAT5cableisusedtoconnecttheswitches,assuming10/100Ethernetisused.
第4题：
Which of the following is not an essential prerequisite for AutoQoS to be correctly applied to an interface（）
- A、The interface must be configured as a Multilink PPP interface.
- B、The correct bandwidth should be configured on the interface.
- C、A QoS policy must not be currently attached to the interface.
- D、CEF must be enable
- E、AutoQoS must be enabled globally before it can be enabled on the interface.
- F、An IP address must be configured on the interface if its speed is equal to or less than 768 kbps.
正确答案:A,E
第5题：
Which two Cisco AutoQoS configuration statements are true？ （）
- A、the auto discovery qos command is supported on serial interfaces， subinterfaces， and virtual interfaces
- B、CEF must be enabled before configuring the auto discovery qos command
- C、the auto discovery qos privilege EXEC command must be configured on a router for several days to collect a sampling of data traffic
- D、the auto qos trust command relies on NBAR to provide VoIP classification
- E、the auto qos voip command configures the voip classification on routers and switches
正确答案:B,E
第6题：
A. QoS must be set to Platinum
B. WMM must be enabled
C. QoS must be set to Gold
D. TSPEC must be disabled
E. Cisco Compatible Extensions must be disabled
第7题：
A.A
B.B
C.C
D.D
E.E
F.F
第8题：
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur?（）
A. The switch that will share the VLAN information must be in the VTP Server mode.
B. The switches must be in the same VTP domain.
C. The switch that will share the VLAN information must be configured as the root bridge.
D. The switches must be configured to use the same VTP version.
E. The switches must be configured to use the same STP version.
F. The switches must be configured to use the same type of ID tagging.
G. The switches must be connected over VLAN trunks.
第9题：
What must be true about the client before upstream traffic stream metrics can be displayed on the Cisco WLC?（）
- A、must be Cisco Compatible Extensions version 2
- B、must be Cisco Compatible Extensions version 3
- C、must be Cisco Compatible Extensions version 4
- D、must be associated to a Platinum QoS WLAN
- E、must be associated to an access point on a Cisco WLC with code version 5.0 or newer
正确答案:C
第10题：
Which of the following is not an essential prerequisite for AutoQoS to be correctly applied to aninterface？ （Choose all that apply.）（）
- A、The interface must be configured as a Multilink PPP interface
- B、The correct bandwidth should be configured on the interface
- C、A QoS policy must not be currently attached to the interface
- D、CEF must be enabled
- E、AutoQoS must be enabled globally before it can be enabled on the interface
- F、An IP address must be configured on the interface if its speed is equal to or less than 768 kbps
正确答案:A,E