When is it necessary to use a public IP address on a routing interface?()
第1题:
A. profile
B. domain map
C. IP access-route
D. static IP addressing
第2题:
A. Connect a router on a local network.
B. Connect a router to another router.
C. Allow distribution of routes between networks.
D. Translate a private IP address.
E. Connect a network to the Internet.
第3题:
阅读下面的短文,回答问题 [When an IP packet arrives at a router, generally the router looks at the destination address of the packet, and forwards the packet to one of its network interfaces. The forwarding decision is usually done by looking up the destination address from another data structure called a forwarding table. The forwarding table is created by the router using the routing table and possible routing policies existing in the router. The router then creates a table where it lists which networks are accessible through which of the router’s network interfaces. An IP router looks at every IP packet individually and does the forwarding decision on a packet-by-packet basis. If something changes in the router’s routing table, a packet can take a different route from a preceding packet even if it has the same destination.] From the paragraph above,we can see that the router ( ) a forwarding table according to the routing table and possible routing policies existing in the router. When an IP packet arrives at a router, the ( ) part of packet is normally checked by the router. An IP router checks every IP Packet individually and makes the forwarding decision based on ( ).
A.is generating B.generate C.is generated D.generates A.forwarding table B.network interfaces C.routing policies D.destination address A.the destination address and network interfaces B.forwarding table and network interfaces C.the destination address and forward table D.routing policies and routing table
第4题:
A router has two FastEthernet interfaces and needs to connect to four vlans in the local network.How can you accomplish this task,using the fewest physical interfaces and without decreasing networkper formance?()
A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
第5题:
A.The subnet mask in use is 255.255.255.192.
B.The subnet mask in use is 255.255.255.128.
C.The IP address 172.16.1.25 can be assigned to hosts in VLAN1
D.The IP address 172.16.1.205 can be assigned to hosts in VLAN1
E.The LAN interface of the router is configured with one IP address.
F.The LAN interface of the router is configured with multiple IP addresses.
第6题:
A. The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address 10.10.0.1.
B. DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2.
C. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP a ddress 10.0.0.1
D. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address 10.0.0.6.
E. Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router.
第7题:
A. Addresses in a private range will be not routed on the Internet backbone.
B. Only the ISP router will have the capability to access the public network.
C. The NAT process will be used to translate this address in a valid IP address.
D. Several automated methods will be necessary on the private network.
E. A conflict of IP addresses happens, because other public routers can use the same range.
第8题:
You are trying to connect directly into the LAN prot of a Ezonexam router. You want to telnet to the local Cisco router using TCP/IP but cannot create a session.
What should you do to resolve the problem?
A. Use a straight-through cable to connect your computer's COM port to the router's console port.
B. Use a crossover cable to connect your computer's COM port to the router's console port.
C. Use a straight-through cable to connect your computer's COM port to the router's Ethernet port.
D. Use a crossover cable to connect your computer's Ethernet port to the router's Ethernet port.
E. Use a rollover cable to connect your computer's Ethernet port to the router's Ethernet port.
F. Use a straight-through cable to connect your computer's Ethernet port to the router's Ethernet port.
G. None of the above
第9题:
A.the summarized address for all of the internal subnetted addresses
B.the MAC address of the router used by inside hosts to connect to the Internet
C.a globally unique, private IP address assigned to a host on the inside network
D.a registered address that represents an inside host to an outside network
第10题:
A router has two FastEthernet interfaces and needs to connect to four vlans in the local network.How can you accomplish this task,using the fewest physical interfaces and without decreasing network performance?()