微软认证考试

You are an administrator of a small business network. You have one dial-up account at an ISP and want all computers on your network connect to the Internet.  You have enabled Internet connection sharing. You do not want to initiate this connection automa

题目

You are an administrator of a small business network. You have one dial-up account at an ISP and want all computers on your network connect to the Internet.  You have enabled Internet connection sharing. You do not want to initiate this connection automatically when a request for Internet reaches your computer. What should you do? （）

  • A、You should uncheck “Enable on demand dialing
  • B、Enable on-demand dialing
  • C、Enable sharing a modem on one computer on the network
  • D、Configure a DHCP Server
  • E、Disable Internet Connection Sharing
参考答案和解析
正确答案:A
如果没有搜索结果，请直接 联系老师 获取答案。
相似问题和答案

第1题：

You have a computer that runs Windows Vista.You connect to your company’s network by using a virtual private network (VPN) connection. You notice that when you establish the VPN connection, you are unable to access Internet Web sites. When you disconnect the VPN connection, you can access Internet Web sites.You need to access Internet Web sites while you are connected to the VPN connection.What should you do?（）

A.A

B.B

C.C

D.D


参考答案：D

第2题：

You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter.Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.You need to configure the wireless connection to allow your computer to discover other computers.What should you do?（）

A.A

B.B

C.C

D.D


参考答案：A

第3题：

You are the administrator for your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.

You create a RIS image. You load the image onto the RIS server. You then start the new computers.

You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.

What should you do?

A．Add a Windows 2000 Server computer running WINS to the network.

B．Add a Windows 2000 Server computer running DHCP to the network.

C．Add the domain Everyone group to the RIS OS image security settings.

D．Place the new computers on the same segment as the RIS server.


正确答案：B
解析：Explanation:RIShasthefollowingrequirements:(1)DNSserver,(2)DHCPserverand(3)ActiveDirectory(Windows2000DomainController)TheexhibitshowsthepresenceofActiveDirectoryandDNS,butalackofaDHCPserver.WemustthereforeaddaDHCPserver.Incorrectanswers:A:RISdoesnotuseWINSatall.RISrequiresDNSfornameresolution.C:ThereshouldbenoneedtomanuallyconfigurefilepermissionsontheRISOSimage.D:MovingthenewcomputersintothesamesegmentwillnotworksincethereisnoDHCPserverpresent.Generally,RISworkswellinnetworkswithsubnets.

第4题：

You create a new dial-up connection to connect to the Internet. You configure the Internet connection to enable Internet Connection Sharing. However， you cannot see or connect to any shared resource on your network. What should you do？（）

  • A、Configure the dial-up connection to disable shared access.
  • B、Configure the dial-up connection to disable on-demand dialing.
  • C、Disable data encryption in the new dial-up connection.
  • D、Use the ipconfig command to release and renew your network TCP/P address.

正确答案:D

第5题：

You are the network administrator for Company.You install Windows 2000 Professional on your computer at home. Your computer contains threemodems， each connected to a separate phone line. You create a new dial-up connection to connect toCompany’s remote access server. You configure the connection to dial up all three devices. You start thedial-up connection and connect to the remote access server. You notice that only one of the modems isconnected to the remote access server.You want to use as many modems as possible to make a single connection to the remote access server.What should you do？ （）

  • A、Configure the dial-up connection to sue a SLIP connection.
  • B、Configure all three modems to use the same phone line.
  • C、Configure the remote access server to enable multi-link.
  • D、Configure the dial-up connection to only dial two of the three modems.
  • E、Configure the dial-up connection to Enable LCP extensions.

正确答案:C

第6题：

You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window.You need to view this connection in the Connect to a network window.What should you do?（）

A.A

B.B

C.C

D.D


参考答案：D

第7题：

You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）

  • A、Configure a DNS suffix.
  • B、Configure a subnet mask.
  • C、Configure an LMHOSTS file.
  • D、Configure an Interface metric.
  • E、Configure at least one DNS address.

正确答案:B,E

第8题：

When you are(71)a home or small office network, it is recommended that you use the Network Setup Wizard in Windows XP Home Edition to enable Internet Connection Sharing. The Network Setup Wizard automatically provides all of the network settings you need to(72)one Internet connection with all the computers in your network.

After ICS is enabled, and you make sure that all of your computers can(73)with each other and they have Internet(74), you can use programs such as Internet Explorer and Outlook Express as if they were(75)connected to the Internet service provider(ISP). When a request to the Internet is made, the ICS host computer connects to the ISP and creates the connection so that other computers can reach a specified Web address or download E-mail.

A．creating

B．reach

C．going for

D．setting up


正确答案：D
解析：本题意思为“建立网络”。建立计算机网络通常使用setup。答案为D。

第9题：

You use a Windows 2000 Professional portable computer both at the office and at home. In the office youconnect the portable computer to a docking station and use Internet Explorer to access the Internetthrough your LAN connection.At home， you configure a new dial-up connection to the Internet. Now when you attempt to access theInternet from the office you are prompted to connect via your dial-up connection. When you cancel thismessage， you can only work offline and cannot access the Internet.You want to maintain your dial-up connection for home use and your ability to access the Internet whenconnected to the company LAN. What should you do？（）

  • A、Reconfigure the dial-up connection to dial-up to a private network.
  • B、Create another connection that uses a virtual private network （VPN） to connect to a privatenetwork though the Internet.
  • C、Configure Internet Explorer to automatically detect proxy settings.
  • D、Configure Internet Explorer to dial whenever a network connection is not present.

正确答案:D

第10题：

You have a server named Server2 that runs Windows Server 2003 Service Pack 2 (SP2). The server has two network connections named Local Area Connection and Internet Connection.You configure network address translation (NAT) on Server2 as shown in the exhibit. (Click the Exhibit button.) You configure all client computers to use Server2 as their default gateway.Users report that they cannot connect to the Internet. You successfully connect to the Internet from Server2.You need to ensure that client computers can access Internet resources.  What should you do?（）

  • A、Change the Internet Connection interface type to Basic firewall only. 
  • B、Change the Internet Connection interface type to Private interface connected to private network. 
  • C、Add Local Area Connection as a new interface for the NAT protocol and set the interface as a Public interface connected to the Internet. 
  • D、Add Local Area Connection as a new interface for the NAT protocol and set the new interface as a Private interface connected to private network.

正确答案:D

更多相关问题
相关内容