The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most pro

第1题：

An administrator has setup three partitions using shared pool with 2 processing units. They are activated in the following sequence: Partition one: Min. = 1.0, max = 2.0, desired = 1.5 Partition two: Min. = 1.0, max = 2.0, desired = 1.0 Partition three: Min. = 0.1, max = 1.0, desired = 0.8. What is the outcome?（）

• A、Partition one starts and has 2.0 processors allocated. Partition two does not start. Partition three does not start. 
• B、Partition one starts and has 1.0 processors allocated. Partition two starts and has 1.0 allocated. Partition three does not start. 
• C、Partition one starts and has 1.5 processors allocated. Partition two does not start. Partition three starts and has 0.8 processors allocated capacity. 
• D、Partition one starts and has 1.5 processors allocated. Partition two does not start. Partition three starts and has an allocated capacity of 0.5 processors. 

第2题：

An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

• A、The BIOS is set with the wrong boot order.
• B、The jumpers have not been set on the hard drive.
• C、The hard drive is not compatible with the system board.
• D、The boot.ini file needs to be modified.

第3题：

Companycom has a 16 way 1.65 GHz p5 590 and wants to install a i5/OS partition on their server. The customer wants to keep installation costs to a minimum by sharing devices between all LPARs. Before the operating system can be installed in this partition, the customer was told that there are certain limitations that must be observed. What are these limitations?（）

• A、When the i5/OS partition is housed in the p5 590, the HMC allows seamless installation in a partition as long as the minimum one processor, 256 MB of memory, one Ethernet and one boot adapter/disk is available from internal hardware. 
• B、V5R3 and later releases of i5/OS can be installed on a POWER5 server partition. Only one processor can be assigned to the i5/OS. A special expansion tower must be ordered. This expansion tower and its devices can be shared with other OS partitions. 
• C、When the i5/OS partition is housed in the p5 590, the 5250 Twinaxial console must be used to set up the partition. Only one processor can be assigned to the i5/OS partition. A special expansion tower must be ordered to house the IOPs. Devices in the special expansion tower can be shared with other Linux partitions.  
• D、V5R3 and later releases of i5/OS can be installed on IBM eServer p5 servers. i5/OS can run on two processors in the p5 590. A special expansion tower must be ordered. This expansion tower and its devices cannot be shared with other OS partitions. The iSeries expansion towers are seen by the IBM eServer p5 server as an I/O subsystem.

第4题：

A system administrator for a business recovery service center needs to test disaster recovery strategies for their clients running Linux. Each client has a different system configuration. Each time a client comes in, the system configuration of the managed system must change. What is the best way to handle this using LPAR?（）

• A、Create a system profile. Reconfigure the managed system by activating and deactivating the system profiles. 
• B、Create one partition profile for each client. Reconfigure the managed system by activating the partition profiles for that client. 
• C、Dynamically move processors and memory as needed into each logical partition. Reconfigure the managed system by activating and deactivating partition profiles. 
• D、Dynamically move processors and memory into each logical partition on the server if additional resources are needed. Reconfigure the managed system by activating and deactivating the system profiles.

第5题：

A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）

• A、The adapter must be taken offline prior to the firmware update
• B、The adapter must be assigned to the service partition prior to the firmware update
• C、The system has not been rebooted since the adapter was added to the Logical Partition
• D、The adapter must be dynamically removed from the Logical Partition prior to the firmware update

第6题：

An administrator logs into a server and notices slow performance.  When the system finishes the logon process a message is displayed saying the system is out of Virtual Memory.  Which of the following is the MOST likely cause of this issue？（）

• A、The drives have been configured as basic.
• B、The system partition with the page file is out of space.
• C、The VMFS has bad sectors.
• D、The drivers for the memory have become corrupt.

第7题：

A database administrator wants to design a multi-partition database that can take advantage of both intra-partition parallelism and inter-partition parallelism. Which configuration will allow the use of these types of parallelism while using the least number of hardware components (servers, processors)? （）

• A、one server having at least two processors  
• B、two servers having one processor and one logical database partition  
• C、one server having four processors and two logical database partitions  
• D、two servers each having four processors and two logical database partitions

第8题：

An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）

• A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 
• B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 
• C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 
• D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

第9题：

Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）

• A、Create all the partitions as AIX 5.2， each having two dedicated processors.
• B、Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.
• C、Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.
• D、Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.

第10题：

An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）

• A、 0
• B、 1
• C、 255
• D、 256