During a NIM install, the system stops with the LED code 611.What is the cause of the issue?（）A、A failure to NFS mount filesystems from the NIM clientB、A failure to NFS mount filesystems from the NIM masterC、A failure to retrieve the tftp client info from

第1题：

The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）

• A、It is a hardware problem caused by the power failure.
• B、There is a network problem, most probably with name resolution.
• C、Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.
• D、Some filesets may be marked as broken and need to be reinstalled.

第2题：

An administrator is investigating why a non-prompted NIM rte install is failing after the successful netboot of the spot. A matching spot and lpp_source are correctly allocated to the NIM client in addition to a bosinst_data. What is the most likely cause of the install failure?（）

• A、The bosinst_data has an incorrect console defined.
• B、The bosinst_data is incompatible with the level of spot.
• C、The bosinst_data has an incorrect disk location defined.
• D、The bosinst_data has an incorrect language option defined.

第3题：

第4题：

For NIM to install client machines located in a non-adjacent network， which routing must be defined？（）  

• A、Boot/install servers will be required on each intermediate network.
• B、When an install is initiated by the client， routing is only required from the LPAR back to the NIM master.
• C、When an install is initiated by the NIM master， routing is only required from the NIM master to the client.
• D、Appropriate network NIM resources need to be defined to the NIM master to allow routing in both directions.

第5题：

New AIX systems arrive without a CDROM drive. All systems do not have the system hardware configuration. Which of the following options is the most appropriate way to install AIX on the systems?（）

• A、Install CDROM drives or tape drives on the systems because that is the only way to install AIX.
• B、Install one system. Take a mksysb from the first system and resotre the mksysb to the remaining systems.
• C、Install one system. Mirror rootvg onto a disk from each of the remaining systems.
• D、Setup and NIM master and resources.

第6题：

A System p administrator plans to install a new system with AIX 5.3 TL5 using a NIM server.  Which of the following provide post install diagnostics（）

• A、SPOT
• B、lpp_source
• C、mksysb
• D、install CD

第7题：

After updating the system, the system administrator runs the lppchk-v command. During this process, the bos.rte.libc is in a broken state. Which of the following procedures should be performed to fix this problem?（）

• A、Reinstall the system
• B、Use installp -r to reject the broken fileset
• C、Use installp -acgFXd to reinstall the fileset at the same level
• D、Use install -u to remove this broken fileset and reinstall it again

第8题：

第9题：

What are the minimal resources to perform a NIM BOS install?（）

• A、spot, lpp_source
• B、mksysb, lpp_source
• C、boot, bundle, nim_script
• D、aix disks, spot, lpp_source

第10题：

A system administrator needs to quickly migrate a machine from AIX 5.1 to AIX 5.2. The administrator will only be allowed enough downtime to reboot the machine. Which installation method should be used to accomplish this task？（）

• A、Perform a migration installation during the reboot process.
• B、Perform an alternate disk installation and migration using NIM.
• C、Copy the /usr directory from another 5.2 server to this server.
• D、Perform an update_all install from 5.2 media to take effect on reboot.