A server is having problems booting into the operating system. Which of the following can provide important information to begin to troubleshoot the cause?（）A、System logsB、Firmware updatesC、POST messagesD、Application logs

第1题：

Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile？（）

• A、 boot policy and BIOS policy
• B、 disk scrub and boot policy
• C、 BIOS setting scrub， boot policy， and BIOS policy
• D、 disk scrub and BIOS setting scrub

第2题：

An administrator is having problems with a server’s built-in I/O devices such as keyboard and USB ports. Which of the following is the BEST solution to resolve the problem？（）

• A、Upgrade to the latest security patch
• B、Reinstall the operating system
• C、Update the faulty equipment drivers
• D、Upgrade to a new service pack

第3题：

第4题：

A server is having problems booting into the operating system.  Which of the following can provide important information to begin to trouble shoot the cause？（）

• A、 System logs
• B、 Firmware updates
• C、 POST messages
• D、 Application logs

第5题：

After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem?（）

• A、Boot using recovery console and restore the previous driver.
• B、Boot the server, press F8 and access last known good configuration.
• C、Restore the server using last backup tape.
• D、Boot the server with ASR option.

第6题：

Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network，but clients using PEAP are failing to log on. Which situation would result in thistype ofproblem？（）

• A、Posture validation has not been enabled.
• B、The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authentication.
• C、Clients and server are not using certificates.
• D、Clients have been set to validate the server identity.

第7题：

A server is having problems accessing its presented storage on a SAN.  Which of the following could be causing the problem？（）

• A、NIC
• B、HBA
• C、Tape backup drive
• D、SCSI adapter
• E、CPU

第8题：

An AIX server will not boot in normal mode and the server must be booted into maintenance  mode to rebuild the boot logical volume. A NIM master is not defined in this environment.  How is the system booted into maintenance mode to perform this task （）

• A、Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.
• B、Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.
• C、Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.
• D、Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.

第9题：

An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

• A、The BIOS is set with the wrong boot order.
• B、The jumpers have not been set on the hard drive.
• C、The hard drive is not compatible with the system board.
• D、The boot.ini file needs to be modified.

第10题：

AIX shows the boot order in the following output.hdisk0 hdisk1 blv=hd5 cd0. What will happen when the system administrator reboots the server?（）

• A、The server will boot from cd0
• B、The server will boot from hdisk0
• C、The server will boot into SMS mode
• D、The server will boot from hdisk1