A client has a need to look at and add many image files but has no need to change them. Which of the following media types would BEST meet the client’s needs？（）A、CD-RWB、DiskC、FlashD、WORM

第1题：

A developer is designing a web application that must verify for each request： The originating request is froma trusted network. The client has a valid session.The client has been authenticated. Which design pattern provides a solution in this situation？（）

• A、Transfer Object
• B、Session Facade
• C、Intercepting Filter
• D、Template Method
• E、Model-View-Controller

第2题：

A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it，which continue to pass traffic. What has causedthis problem？（）

• A、H-REAP AP1 has reached its client limit.
• B、H-REAP AP2 has reached its client limit.
• C、H-REAP AP2 lost its connection to the controller.
• D、H-REAP AP1 lost its connection to the controller.

第3题：

第4题：

Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）

• A、Set the SSID value in the client software to public.
• B、Configure open authentication on the AP and the client.
• C、Set the SSID value on the client to the SSID configured on the AP.
• D、Configured MAC address filtering to permit the client to connect to the AP.

第5题：

A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAPAP2. H-REAP AP2 has six other clients associated to it，which continue to pass traffic. What hascaused thisproblem？（）

• A、H-REAP AP1 has reached its client limit.
• B、H-REAP AP2 has reached its client limit.
• C、H-REAP AP2 lost its connection to the controller.
• D、H-REAP AP1 lost its connection to the controller.

第6题：

On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off. What does this indicate？（）

• A、The client card has failed.
• B、The client card is not associated to the network.
• C、The driver has been installed incorrectly.
• D、The client card has awakened from power-save mode.

第7题：

A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）

• A、The incorrect channel is configured on the client.
• B、The client's IP address is on the wrong subnet.
• C、The client has an incorrect pre-shared key.
• D、The SSID is configured incorrectly on the client.

第8题：

Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）

• A、Set the SSID value in the client software to public.
• B、Configure open authentication on the AP and the client.
• C、Set the SSID value on the client to the SSID configured on the AP
• D、Configure MAC address filtering to permit the client to connect to the AP

第9题：

Under which three conditions does a client initiate roaming between wireless cells in the Company  WLAN？ （）

• A、 The access point has broadcast too many SSIDs.
• B、 The wireless client has missed too many beacons from the access point.
• C、 The maximum data retry count， initiated by the wireless client， is exceeded.
• D、 The wireless client has reduced the data rate.
• E、 The access point has requested client reauthentication.
• F、 The wireless client has missed too many IAPP （Inter Access Point Protocol） updates.

第10题：

A client has called with concerns that their computer problem has not been resolved by the onsite technician who has left. As the technicians supervisor， which of the following is the BEST course of action in this situation？（）

• A、Tell the client that they will need to place another service call.
• B、Ask the client if they would like to discuss their computer problems in more detail.
• C、Tell the client that another technician will be sent out.
• D、Inform the client that the problem will be resolved by the onsite technician at another time.