如果我想要查看eth0的子网掩码需要用到的命令不可能是()?
第1题:
在 Linux 系统中,要查看如下输出,可使用命令( ) 。
A.[root@localhost]ifconfig
B.[root@localhost]ipconfig eth0
C.[root@localhost]ipconfig
D.[root@localhost]ifconfig eth0
第2题:
快速启动网卡“eth0”的命令是( )。
A、ifconfig eth0 noshut
B、ipconfig eth0 noshut
C、ifnoshut eth0
D、ifup eth0
第3题:
● 在Linux系统中,把本机IP地址更改为192.168.1.1的正确命令是 (46) 。
(46)A. [/root]#ipconfig eth0 192.168.1.1 up
B. [/root]#ifconfig eth0 192.168.1.1 up
C. [/root]#ipconfig 192.168.1.1 up
D. [/root]#ifconfig 192.168.1.1 up
在linux系统中,可以用ifconfig的命令查看网络接口的配置或者对网络接口进行配置,查看网络接口配置的命令格式是“ifconfig 【interface】”,A、C是windows中的命令,D没有指定本机网络接口名称,都是错误的
第4题:
第5题:
在Linux中,给计算机分配IP地址正确的方法是( )。
A、ipconfig eth0 166. 111. 219.150 255. 255. 255.0
B、ifconfig eth0 166. 111. 219.150 255. 255. 255.0
C、ifconfig eth0 166. 111. 219.150 netmask 255.255.255.0
D、在Linux窗口配置中配置
第6题:
在Linux系统中,使用ifconfig设置接口的IP地址并启动该接口的命令是( )。
A.ifcorffig eth0 192.168.1.1 mask 255.255.255.0B.ifconfig 192.168.1.1 mask 255.255.255.0 upC.ifconfig eth0 192.168.1.1 mask 255.255.255.0 upD.ifconfig 192.168.1.1 255.255.255.0
第7题:
与“ifup eth0”命令功能相同的命令是( )。
A、ifdown eth0 up
B、ipconfig up eth0
C、ifconfig up eth0
D、ifconfig eth0 up
第8题:
在Linux系统中,把本机IP地址更改为192.168.1.1的正确命令是(46)。
A.[/root]#ipconfig eth0 192.168.1.1 up
B.[/root]gifconfig eth0 192.168.1.1 up
C.[/root]#ipconfig 192.168.1.1 up
D.[/root]#ifconfig 192.168.1.1 up
第9题:
第10题:
在linux系统中,为本机以太网卡配置IP地址为172.10.5.9,子网掩码为255.255.255.0,应执行()命令。