用来设定载入最好的性能但有可能影响稳定的默认值的参数是()。
第1题:
A. Reboot the device
B. Run the recovery script
C. Reset the root password
D. Reset the user passwords
E. Load factory-default configuration
第2题:
A. Remove the BIOS chip on the PC
B. Re-flash the BIOS
C. Run password cracking software on the users PC
D. Set the password clear jumper on the motherboard
第3题:
To safeguard the operator and other personnel working on or near a hoisting operation, which of the following precautions should be observed?
A.Keep a load on the hoist until all personnel are finished working
B.Set the load on a movable dolly when transportation may be needed
C.Have one man keep a hand on the load to steady it
D.Insure that the lifting gear capacity is not exceeded
第4题:
下列()命令用来给在创建用户时设定密码。
第5题:
A.Load Optimized Defaults
B.Set Supervisor Password
C.Load Fail-Safe Defaults
D.PC Health Status
第6题:
A.reset configuration
B.load factory-default
C.load override default
D.set default configuration
第7题:
Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly? ()
A. On router A, set the default local - preference to 50.
B. On router B, set the default metric to 150.
C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.
D. On router B, set the default local -preference to 150.
第8题:
A. load factory-default
B. load override factory-default
C. load replace default
D. load set default
第9题:
In vessel construction,a greater number of watertight bulkheads results in ______.
A.increased capacity to set flooding boundaries
B.decreased capacity to set flooding boundaries
C.reduced compartmentation
D.greater deck load capacity
第10题:
SLBLoadBalancer中哪个接口是用来修改SLB实例的计费方式的?()