单选题On a series 1010 lightweight access point， the alarm led is flashing red， and all other leds are off. What is the lightweight access point indicating？（）A it has lost contact with controller.B its ip address already exists.C it requires a code upgrade.D

第1题：

Which issue or set of issues does the Lightweight Access Point Protocol （LWAPP） address？（）

• A、 reduction of processing in wireless controllers
• B、 distributed approach to authentication， encryption， and policy enforcement
• C、 provides security by blocking communication between access points and wireless clients
• D、 access point discovery， information exchange， and configuration

第2题：

A blinking green power LED indicates which of the following conditions on a Cisco Series 1000 lightweight access point？（）

• A、lost connection to the controller
• B、duplicate IP address
• C、startup
• D、site survey mode

第3题：

On a Cisco 1000 Series controller-based access point， the alarm LED is flashing red， but the otherLEDs are off. What is this access point indicating？（）

• A、Its IP address already exists.
• B、It is operating normally.
• C、It requires a code upgrade.
• D、It has lost contact with the controller.

第4题：

A customer wants to deploy a single-band access point for an 802.11 b/g solution now. with theoption to upgrade to 802.11 a/b/g as network requirements change. Which Cisco access point series is best suited for this requirement？（）

• A、 CiscoAironet 1000 Series products
• B、 CiscoAironet 1100 Series products
• C、 CiscoAironet 1130AG Series products
• D、 CiscoAironet 1200 Series products

第5题：

On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking， butthe status LED and Ethernet LED are both off. What does this indicate？（）

• A、A firmware upgrade is in progress.
• B、An access point buffer overflow is occurring.
• C、The internal radio has failed.
• D、The access point is booting.

第6题：

You need to set up a Company AP to act as a wireless repeater.  What are three characteristics of  this wireless repeater topology？（）

• A、 The recommended overlap of the access point on the wired LAN and the wireless repeater is  25%.
• B、 Autonomous access points are required.
• C、 The SSID of the root access point must be configured on the repeater access point.
• D、 The recommended overlap of the access point on the wired LAN and the wireless repeater is  50%.
• E、 Lightweight access points are required.
• F、 The recommended overlap of the access point on the wired LAN and the wireless repeater is  75%.
• G、 The SSID of the root access point must be distinct from that of the repeater access point.

第7题：

The LWAPP （Lightweight Access Point Protocol） is in use within the Company wireless LAN.  Which statement is true about this protocol？（）

• A、 Real-time frame exchange is accomplished within the access point.
• B、 The control traffic between the client and the access point is encapsulated with the LWAPP. 
• C、 Authentication， security， and mobility are handled by the access point.
• D、 Data traffic between the client and the access point is encapsulated with LWAPP.
• E、 None of the other alternatives apply

第8题：

On a cisco aironet 1230 series autonomous access point， the status led is solid red， and the ethernet and radio leds are both off. What does this indicate？（）

• A、a firmware upgrade is in progress.
• B、the internal radio has failed.
• C、an access point buffer overflow is occurring.
• D、the access point is booting.

第9题：

On a Cisco Aironet 1130AG Series standalone access point， the status LED is dark blue and blinking. What does this indicate？（）

• A、The internal radio has failed.
• B、A firmware upgrade is in progress.
• C、An access point buffer overflow is occurring.
• D、The access point is booting.

第10题：

On a Series 1010 lightweight access point， the alarm LED is flashing red， and all other LEDs are off. What is the lightweight access point indicating？（）

• A、It has lost contact with controller.
• B、Its IP address already exists.
• C、It requires a code upgrade.
• D、It is operating normally.