CMS专题
单选题You install a new AGP video adapter in your Windows 2000 Professional Computer. You start the computer and notice that the video display has retained the default setting of 16 color, 640 x 480 resolution. You install the manufacturer’s drivers for the
题目
Start the computer in the debug mode. Restore the original adapter driver settings.
Start the computer in the Safe Mode. Rename the AGP device by using Device Manager.
Start the computer by using the Recovery Console. Rename the AGP driver.
Start the computer by using the emergency repair disk. Restore the original driver settings.
参考答案和解析
相似问题和答案
第1题：
One user has a Video Capture Card installed on her pc. She uses it to capture video pictures. She complains the video capture card is not working properly and she couldn't view captured video. You check out the Device manager, which does not indicate any Video devices installed on your system, but you see a yellow mark placed besides the audio device. What should you do in order to make the video capture device work? （）
- A、Enable the device in Device manager
- B、Install new driver from Device Manager
- C、Disable PNP and install manually
- D、Copy the manufacturer's driver to WINNT/driver cache/i386/ and then let Windows 2000 to install the device.
正确答案:B
第2题：
You are the administrator of ExamSheet.net's network. You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver." The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）
- A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers.
- B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable Windows File Protection
- C、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File Protection
- D、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation
正确答案:D
第3题：
You are the network administrator for Ezonexam.com.
You need to install Windows 2000 Professional on 75 new computers in your network. You use Setup Manager wizard to configure a fully automated installation script. file. You test the unattended installation using the fully automated installation script. file. When the installation completes you realize that the Windows 2000 Professional CD does not contain the driver for the Plug and Play video adapter used by the new computers.
You want to include the correct driver for the video adapter when installing Windows 2000 Professional.
What should you do? (Each correct presents part of the solution. Select three.)
A.Run sysprep.exe with the -pnp parameter.
B.In the UserData section of the fully automated installation script. file, specify the ProductID variable.
C.In the Unattended section of the fully automated installation script. file, set the Oem PnP Drivers Path property to the location of the video driver files.
D.In the Unattended section of the fully automated installation script. file, set the Oem Preinstall property to Yes.
E.Copy the video driver to the i386\$OEM$\$1\VidDriver.
F.Copy the video driver to the i386\$$\System32.
C,D,E 解析：Explanation: The $OEM$ subfolder is used to hold applications, drivers, or utilities you want Setup to copy to the target computer. If Setup finds the $OEM$ folder in the root of the distribution folder, it copies all of the files found in this directory to the temporary directory created during the text portion of Setup. The OEMFILESPATH key in the answer file allows you to create the $OEM$ subfolder outside of the distribution folder. Thus options C, D and E should enable you to include the correct driver for the video adapter.
Incorrect answers:
A: Sysprep.exe with the -pnp parameter is the Mini-Setup wizard that detects new or different Plug and Play devices on the destination computer and disables those that were used on the master computer but not found on the destination computer. You might want to use the -pnp switch to enable legacy device detection or to re-enumerate the devices on the destination computer. Using this switch adds a few extra minutes to the end-user's experience in order to do a complete hardware redetection. However, this is not what is required in this case.
B: The ProductID key specifies the Microsoft Product Identification (Product ID) number. This parameter sets the Product ID for all computers installed using this unattended text file to the same value. Specifying the ProductID variable will not ensure that you have the correct driver for the video adapter included in the installation.
F: The video driver should be copied to the i386\$OEM$\$1\VidDriver instead.
第4题：
You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）
- A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings
- B、Start the computer in the debug mode. Restore the original adapter driver settings
- C、Start the computer in Safe mode. Rename the AGP device by using device manager
- D、Start the computer by using the recovery console. Rename the AGP driver.
正确答案:A
第5题：
You are the network administrator for ExamSheet.net. You administer ExamSheet’s Windows 2000 network. You install Windows 2000 Professional on a computer that has a Non-Plug and Play video adapter. You want to configure the video adapter to use 32-bit color and 1024 x 768 resolution. The color setting for the video adapter is set to 16 colors and 640 x 480 resolutionand you cannot change either setting. You view display properties and confirm that the appropriate monitor is selected. You want to be able to change the color setting for this video adapter. What should you do？ （）
- A、UseList All Modesto select the adapter default mode.
- B、Change the adapter refresh rate to 60Mhz.
- C、Upgrade the monitor drivers.
- D、Upgrade the display adapters drivers
正确答案:D
第6题：
You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process. You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do? （）
- A、Restart the Add/Remover Hardware wizard. Manually add the SCSI adapter drivers.
- B、Restart the computer in safe mode. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
- C、Configure Windows 2000 Professional to use driver signing. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
- D、Copy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder. Restart the Add/Remover Hardware wizard to detect the SCSI adapter.
正确答案:A
第7题：
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）
- A、When away from the office use Device Manager to remove the adapter.
- B、When away from the office configure the startup properties for the adapter to be automatic.
- C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
- D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
正确答案:C
第8题：
Your computer runs Microsoft Windows XP Professional. The computer has the following hardware configuration:·512 MB of RAM·1-GHz processor·60-GB hard disk·15 GB of free space·64-MB video adapter.You perform a clean install of Microsoft Windows Vista.You need to ensure that Microsoft Windows Aero Experience is supported.What should you do?（）
A.A
B.B
C.C
D.D
第9题：
You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）
- A、 Update the HAL to support multiple processors.
- B、 In Device Manager， disable the direct memory access controller.
- C、 Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor.
- D、 Reinstall Windows 2000 Professional to support a multi-processor configuration.
正确答案:A
第10题：
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）
- A、Restart the computer in the docking station.
- B、Run the Add/Remove Hardware wizard.
- C、Use Device Manager to scan for hardware changes.
- D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.
- E、Install the new network adapter driver.
正确答案:B,E