CMS专题
单选题What happens if all CTI ports for the configured CTI Port Group are busy when a new call arrives?（）A Caller will receive network busy treatment. B Caller will receive ringing treatment. C CallManager will forward the call to the directory number conf
题目
Caller will receive network busy treatment.
Caller will receive ringing treatment.
CallManager will forward the call to the directory number configured for forward-on busy for this CTI Route Point in CallManager.
An exception is raised, but the call is accepted and processed.
CallManager will forward the caller to the directory number configured in IPCC Express for overflow
相似问题和答案
第1题：
Switch R1 has been configured with the root guard feature. What statement is true if the spanning tree enhancement Root Guard is enabled？ （）
- A、 If BPDUs are not received on a non-designated port， the port is moved into the STP loop- inconsistent blocked state
- B、 IF BPDUs are received on a PortFast enabled port， the port is disabled.
- C、 If superior BPDUs are received on a designated port， the interface is placed into the root- inconsistent blocked state.
- D、 If inferior BPDUs are received on a root port， all blocked ports become alternate paths to the root bride.
正确答案:C
第2题：
You have just successfully added a JTAPI trigger in CRS Administration. Which two items are automatically configured on your CallManager?（）
- A、CTI dialogue control port
- B、CTI Route Point
- C、dialogue group
- D、Call Control Group
- E、CTI Route Port
- F、CTI Route Point association with JTAPI User
正确答案:B,F
第3题：
A Ezonexam switch is configured with all ports assigned to VLAN 2. In addition, all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?
A．The additions will create more collisions domains.
B．IP address utilization will be more efficient.
C．More bandwidth will be required than was needed previously.
D．An additional broadcast domain will be created.
E．The possibility that switching loops will occur will increase dramatically.
解析：Explanation:
A VLAN is a group of hosts with a common set of requirements that communicate as if they were attached to the same wire, regardless of their physical location. A VLAN has the same attributes as a physical LAN, but it allows for end stations to be grouped together even if they are not located on the same LAN segment.
Networks that use the campus-wide or end-to-end VLANs logically segment a switched network based on the functions of an organization, project teams, or applications rather than on a physical or geographical basis. For example, all workstations and servers used by a particular workgroup can be connected to the same VLAN, regardless of their physical network connections or interaction with other workgroups.
Network reconfiguration can be done through software instead of physically relocating devices. Cisco recommends the use of local or geographic VLANs that segment the network based on IP subnets. Each wiring closet switch is on its own VLAN or subnet and traffic between each switch is routed by the router. The reasons for the Distribution Layer 3 switch and examples of a larger network using both the campus-wide and local VLAN models will be discussed later.
A VLAN can be thought of as a broadcast domain that exists within a defined set of switches. Ports on a switch can be grouped into VLANs in order to limit unicast, multicast, and broadcast traffic flooding. Flooded traffic originating from a particular VLAN is only flooded out ports belonging to that VLAN, including trunk ports, so a switch that connects to another switch will normally introduce an additional broadcast domain.
第4题：
What are the components of the JTAPI Subsystem?（）
- A、provider
- B、CTI ports
- C、call control groups
- D、CMT Dialog Control Group
- E、trigger
- F、RM provider
正确答案:A,C,E
第5题：
In CRS Administration, when you add a JTAPI Call Control Group, what is created on the Cisco CallManager?（）
- A、CallManager Call Control Group
- B、CRS CTI Route Point
- C、CRS JTAPI User
- D、CTI ports
- E、CRS Call Control Group
- F、CTI Route Points and directory numbers
正确答案:D
第6题：
Which of the following are automatically configured on the CallManager when entered on the CRS Application Administration?（）
- A、CTI port
- B、CTI Route Point
- C、agent skills
- D、JTAPI user
- E、CRS prompt language
- F、ASR provider
正确答案:A,B,D
第7题：
How are CTI ports in a CTI Port Group added on the CRS Server?（）
- A、They must be created in Cisco Unified CallManager in ascending order (i.e., 1001, 1002, and 1003) with no gaps or missing numbers in the group.
- B、They can be assigned as a range of ports in CRS Application Administration.
- C、They are the same as the CTI Route Points in the Cisco Unified CallManager and automatically built in CRS when they are associated with the JTAPI user.
- D、They are the same as the CTI Route Points in the Cisco Unified CallManager and automatically built in CRS when they are associated with the RM JTAPI user.
正确答案:B
第8题：
What does the command udld reset accomplish？（）
- A、allows an UDLD port to automatically reset when it has been shutdown
- B、resets all UDLD enabled ports that have been shutdown
- C、removes all UDLD configurations from interfaces that were globally enabled
- D、removes all UDLD configurations from interfaces that were enabled per-port
正确答案:B
第9题：
The CTI Port Group is configured under which Subsystem?（）
- A、ICD
- B、CMT
- C、JTAPI
- D、Application
正确答案:C
第10题：
What happens when the CRS Engine fails in a High-Availability CRS deployment? （）
- A、All activities fail over without any loss of data or dropping any calls.
- B、All current agent calls are dropped.
- C、All callers on active CTI ports are dropped.
- D、The standby CRS Engine starts, processing new calls immediately.
正确答案:C