It terminates the client connection after 10 bad packets and the client cannot reconnect to the same instance.
It terminates the client connection after 10 bad packets but the client can still reconnect, and attempt the same operation again.
It terminates the client connection 10 seconds after receiving a bad packet and the client cannot reconnect to the same instance.
It terminates the client connection after receiving a bad packet and the client can reconnect to the same instance after 10 minutes.
第1题:
186 An acceptance control chart has limits that are based on the spec. limits for the product rather than limits which differentiate between random and assignable causes. Under which of the following circumstances should a QC manager consider this type chart
A. When the engineering tolerance on a dimension greatly exceeds the natural dispersion of the manufacturing process
B. When the number of samples outside the current control chart limits become too costly and cumbersome to investigate.
C. When a process is subject to constant but stable tool wear.
D. A and B. E
. A and C
第2题:
A. As ASM instance mounts an ASM control file
B. An ASM instance uses the ASMB process for rebalancing of disks within a disk group
C. Automatic Memory Management is enabled in an ASM instance even when the MEMORY_TARGET parameter is not set explicitly
D. An RDBMS instance gets connected to an ASM instance using ASMB as a foreground process when the database instance is started
第3题:
All of the following statements about control charts are true except:
A . Control charts can be used to establish as well as maintain process control
B . control charts are used to detemine acceptance limits when no limits are stipulated by the product specification; otherwise, one should use the limits dictated by the specification.
C . all data points outside the control chart limits are variations explained by assignable causes.
D . A and B.
E . B and C
第4题:
When cleaning a tank by the Butterworth process,you should begin to pump out the slops ______.
A.At the end of the drop schedule
B.When the process is started
C.When the process is finished
D.When the tank is clean
第5题:
When a process is in control, what do you want to do with the process?().
A.The process should not be adjusted
B.The process may be adjusted for continuous improvement
C.The process should be always adjusted for continuous quality
D.The process should be regularly adjusted
第6题:
29 All of the following statements about control charts are true except:
A. Control charts can be used to establish as well as maintain process control
B. control charts are used to detemine acceptance limits when no limits are stipulated by the product specification; otherwise, one should use the limits dictated by the specification.
C. all data points outside the control chart limits are variations explained by assignable causes.
D. A and B.
E. B and C
第7题:
A. radius update-source-address
B. radius calling-station-format
C. radius accounting server 10.13.7.55
D. radius authentication server 10.13.7.55
第8题:
An acceptance control chart has limits that are based on the spec. limits for the product rather than limits which differentiate between random and assignable causes. Under which of the following circumstances should a QC manager consider this type chart
A . When the engineering tolerance on a dimension greatly exceeds the natural dispersion of the manufacturing process
B . When the number of samples outside the current control chart limits become too costly and cumbersome to investigate.
C . When a process is subject to constant but stable tool wear.
D . A and B.
E . A and C
第9题:
A. Transport layer divides a data stream into segments & adds reliability & flow control information
B. Data link layer adds physical source & destination address & an FCS to the segment
C. Packets are created when the network layer encapsulate a frame with source & destination host address& protocol related control information
D. Packets are created when the network layers adds layers 3 address & control information to a segment
E. The presentation layer translated bits into bits into voltages for transmission across the physical link
第10题: