CMS专题
单选题You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade the computer1. During the upgrade of computer2, a series of power outrages interrupts the upgrade. You discover that upgra
题目
On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys,Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM.
From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys,Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart and upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM.
On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.
On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager.
相似问题和答案
第1题：
You have two computers named Computer1 and Computer2 that run Windows 7. Both computers aremembers of an Active Directory domain. Windows Remote Management (WinRM) is enabled on bothcomputers. You need to remotely create additional disk volumes on Computer1 from Computer2. What should you do?（）
- A、On Computer2, run Winrs and then run Diskpart.
- B、On Computer2, run Winrs and then run Diskmgmt.msc.
- C、On Computer1, install the Telnet Client and then run Diskpart from Computer2.
- D、On Computer1, install the Telnet Client and then use Disk Management from Computer2.
正确答案:A
第2题：
You have two computers named Computer1 and Computer2 that run Windows 7. You need to ensure thatyou can remotely execute commands on Computer2 from Computer1. What should you do?（）
- A、Run Winrm quickconfig on Computer1.
- B、Run Winrm quickconfig on Computer2.
- C、Enable Windows Remote Management （WinRM） through Windows Firewall on Computer1.
- D、Enable Windows Remote Management （WinRM） through Windows Firewall on Computer2.
正确答案:B
第3题：
You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade computer1. During the upgrade of computer2, a series of power outages interrupts the upgrade.
You discover that the upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.
What should you do?
A．On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys, Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM.
B．From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys, Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart the upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM.
C．On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.
D．On computer1, perform. a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager.
解析：Explanation: You can create the four setup boot disks by using either makeboot.exe or makebt32.exe. Both are located in the \Bootdisk directory on the Windows 2000 installation CD. These disks can be used to restart the installation process on computer2.
Incorrect answers:
A: Winnt32 is a 32-bit application and can only be used from inside a Windows environment and not after starting the computer by means of a boot diskette. A computer can only be booted into DOS mode from a boot disk, and DOS mode cannot use 32-bit applications.
B: Winnt32 is a 32-bit application and can only be used from inside a Windows environment and not after starting the computer by means of a boot diskette. A computer can only be booted into DOS mode from a boot disk, and DOS mode cannot use 32-bit applications.
D: The text portion of the setup on computer2 will not be completed. To use a network installation on computer2, computer2 must be booted with a network boot disk.
第4题：
You are upgrading two Windows NT4 computers to Windows 2000. Computer 1 completes the upgrade with no problems. During the upgrade of Computer 2， you experience a power loss and cannot boot into NT4. You want to use Computer 1 to help Computer 2 recover. How can this be done？（）
- A、 Install Windows2000 across the network install.
- B、 Run MAKEBT32.EXE on Computer1 to make diskettes to start Computer 2.
- C、 Copy the boot files from computer 1 to a floppy， boot to the floppy and continue the setup of computer2.
- D、 Computer 1 cannot help to recover Computer 2.
正确答案:B
第5题：
你有两台运行Windows 7的计算机，分别命名为Computer1和Computer2。你需要确保你可以从Computer1上远程执行Computer2上的命令。你该怎么做？（）
- A、在Computer1上运行 Winrm快速配置
- B、在Computer2上运行 Winrm快速配置
- C、在Computer1上启用Windows远程管理器（WinRM）通过防火墙
- D、在Computer2上启用Windows远程管理器（WinRM）通过防火墙
正确答案:B
第6题：
Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）
- A、Can’t be done.
- B、You need to put Windows 2000 on a separate partition from Windows NT 4.0
- C、You need to put Windows 2000 on the same partition as Windows NT 4.0.
- D、You need to upgrade Windows NT 4.0 to SP4.
正确答案:D
第7题：
You have two portable computers that run Windows 7. The computers are not connected to a network. Thecomputers are configured as shown in the following table. Computer name Wireless adapter Networkadapter Bluetooth adapter Computer1 Wireless b/g 100/1000 Mbps Version 2.0 Computer2 Wireless a/b10/100 Mbps Version 1.0 You need to transfer a 1- gigabit file from Computer1 to Computer2. What shouldyou do first?（）
- A、On Computer1， create a wireless ad hoc network.
- B、On Computer2， configure the Bluetooth File Transfer Wizard to send files.
- C、On Computer2， create a network profile to connect to a network named Homegroup.
- D、On Computer1， configure the computer to be a member of a workgroup named Homegroup.
正确答案:A
第8题：
You have two computers named Computer1 and Computer2 that run Windows 7. You need to ensure thatComputer2 has exactly the same firewall rules as Computer1. What should you do on Computer1?（）
- A、Run Winrm.exe quickconfig.
- B、From Windows Firewall with Advanced Security， select Export Policy.
- C、From Windows Firewall with Advanced Security， click Inbound Rules and then click Export List.
- D、Open Local Security Policy. Right-click IP Security Policies on Local Computer and then click Export List.
正确答案:B
第9题：
You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2runs Windows 7. Computer1 has a custom application installed. You create a custom XML file named app1.xml that contains the migration settings for the application. You need to migrate the configuration andapplication data for the custom application from Computer1 to Computer2. What should you do?（）
- A、On Computer1, run Loadstate.exe /l:app1. On Computer2, run Scanstate.exe /l:app1.xml.
- B、On Computer1, run Scanstate.exe /i:app1.xml. On Computer2, run Loadstate.exe /i:app1.xml.
- C、On Computer1, run Loadstate.exe /keyfile:app1.xml. On Computer2, run Loadstate.exe /keyfile:app1.xml.
- D、On Computer1, run Scanstate.exe /genconfig:app1.xml. On Computer2, run Loadstate.exe /config:app1.xml.
正确答案:B
第10题：
You have a portable computer named Computer1 and a desktop computer named Computer2. Bothcomputers run Windows 7. On Computer2, you create a share named Share1 by using the AdvancedSharing feature. You need to ensure that when you connect to Share1 from Computer1, the files that youopen are automatically cached. What should you do?（）
- A、On Computer1， modify the Offline Files settings.
- B、On Computer1， modify the User Profile settings.
- C、On Computer2， modify the properties of Share1.
- D、On Computer2， modify the file sharing connection settings for the Home or Work network profile.
正确答案:C