CMS专题

单选题How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and Level 2 adjacency?（）A set interface fe-0/0/0.0B set interface fe-0/0/0.0 all levelC set interface fe-0/0/0.0 level 3 enableD set interface fe-0/0/0.0

题目
单选题
How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and Level 2 adjacency?（）
A

set interface fe-0/0/0.0

B

set interface fe-0/0/0.0 all level

C

set interface fe-0/0/0.0 level 3 enable

D

set interface fe-0/0/0.0 level 1 level 2

参考答案和解析
正确答案： B
解析： 暂无解析
如果没有搜索结果，请直接 联系老师 获取答案。
相似问题和答案

第1题：

You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100. Which two achieve this result?（）

  • A、set protocols   set ospf area 0   set interface so-0/0/0.100
  • B、set protocols ospf area 0 interface so-0/0/0.100
  • C、edit protocols ospf interface so-0/0/0.100
  • D、edit protocols ospf area 0   set interface so-0/0/0.100

正确答案:B,D

第2题：

You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have decided to use a firewall filter. How should you apply the firewall filter?（）

  • A、as an outbound filter on interface fxp0
  • B、as an outbound filter on interface lo0
  • C、as an inbound filter on interface fxp0
  • D、as an inbound filter on interface lo0

正确答案:D

第3题：

Referring to the exhibit, you are unable to commit the configuration for the ge－0／0／1 interface. What must you do to commit the configuration?()

A. You must set the vlan-tagging parameter under the [edit interfaces ge-0/0/1] hierarchy.

B. You must use the rename command to change unit 100 to unit 0.

C. You must set the encapsulation flexible-ethernet-services parameter under the [edit interfaces ge-0/0/1] hierarchy.

D. You must set the encapsulation vlan-ccc parameter under the [edit interfaces ge-0/0/1 unit 100] hierarchy.


参考答案：A

第4题：

What is shown by the command show interfaces extensive fe-0/0/0 but not shown by the command show interface detail fe-0/0/0？（）

  • A、input error counter
  • B、interface MTU size
  • C、input packets counter
  • D、the IP address on logical interface fe-0/0/0.0

正确答案:A

第5题：

You want to allow your device to establish OSPF adjacencies with a neighboring device connected tointerface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic？（）

  • A、[edit security policies from-zone HR to-zone HR]
  • B、[edit security zones functional-zone management protocols]
  • C、[edit security zones protocol-zone HR host-inbound-traffic]
  • D、[edit security zones security-zone HR host-inbound-traffic protocols]

正确答案:D

第6题：

You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100.Which two achieve this result?（）

  • A、set protocols   setospf area 0   set interface so-0/0/0.100
  • B、set protocols ospf area 0 interface so-0/0/0.100
  • C、edit protocols ospf interface so-0/0/0.100
  • D、edit protocols ospf area 0   set interface so-0/0/0.100

正确答案:B,D

第7题：

You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）

  • A、[edit security policies from-zone HR to-zone HR]
  • B、[edit security zones functional-zone management protocols]
  • C、[edit security zones protocol-zone HR host-inbound-traffic]
  • D、[edit security zones security-zone HR host-inbound-traffic protocols]

正确答案:D

第8题：

How do you enable interface fe－0／0／0 under the [edit protocols isis] level to form both a Level 1 and Level 2 adjacency?()

A. set interface fe-0/0/0.0

B. set interface fe-0/0/0.0 all level

C. set interface fe-0/0/0.0 level 3 enable

D. set interface fe-0/0/0.0 level 1 level 2


参考答案：A

第9题：

You accidentally configured interface so-0/0/0.0 with /32 instead of /30. Which two solutions could you use to correct this configuration?（）

  • A、[edit interfaces so-0/0/0.0]   user@router# replace family inetaddress /32 with /30
  • B、[edit interfaces so-0/0/0.0]   user@router# rename family inetaddress /32 to address /30
  • C、[edit]   user@router# replace interface so-0/0/0.0 family inetaddress /32 with address /30
  • D、[edit interfaces so-0/0/0.0]   user@router# delete family inet address   user@router# set family inetaddress /30

正确答案:B,D

第10题：

You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）

  • A、[edit interfaces]
  • B、[edit security zones]
  • C、[edit system services]
  • D、[edit security interfaces]

正确答案:B

更多相关问题
相关内容