crankshaft
camshaft
piston rod
rack and pinion
第1题:
An increase in the fuel injection pump discharge pressure can be caused by a/an _______.
A.leaking delivery valve
B.excessive bearing end play
C.plugged injector spray hole
D.increased plunger stroke
第2题:
The amount of fuel delivered by a helical plunger fuel injection pump is controlled by ______.
A.varying the pump discharge pressure
B.varying the pump return pressure
C.rotation of the pump plunger
D.rotation of the pump barrel
第3题:
The plunger in a jerk pump is rotated until the release port is uncovered If the port remains uncovered all of the time, which of the listed operations will occur?
A.No fuel will be delivered
B.The maximum effective stroke will be attained
C.The fuel delivered to the cylinder will be excessive
D.The injection nozzle will overheat and carbonize
第4题:
top and bottom
to and fro
up and down
back and forth
第5题:
changes the position of the fuel inlet ports
changes the length of the pump stroke
varies the quantity of fuel delivered
varies the compression of the delivery valve spring
第6题:
An over-speed safety device is usually fitted to a generator engine for ___ in the event of over-speed.
A.stabilizing the ship speed
B.increasing the fuel pump setting
C.braking the crankshaft
D.cutting power off the engine
第7题:
the pump supply pressure
the slope of the fuel cam
how the plunger is rotated
the number of sleeve segments engaged with the rack
第8题:
If you suspect a diesel engine is misfiring due to air leakage into the fuel system, you should begin looking for the leak at the
A.fuel line connections to the cylinder injection valves
B.gasket surfaces of the fuel oil filters
C.discharge fittings of the fuel injector pumps
D.suction side of the fuel oil transfer pump
第9题:
the needle valve
the plunger
the piston
the cylinder
第10题:
regulating the speed of the turbocharger
rotating the fuel injector pump plunger
regulating the speed of the fuel oil transfer pump
changing engine timing