clean off any mud that may have accumulated on the chain
engage or disengage the wildcat
fairlead the chain from the hawse pipe to the wildcat
prevent the chain from fouling the wildcat
第1题:
If an anchor windlass has been idle for some time, you should ______.
A.repack all valve stems
B.lubricate it prior to use
C.replace the foundation bolts
D.balance the warping heads
第2题:
Which two components pass through the shank of an LWT anchor?
A.Anchor shackle and stock
B.Tripping palm and flukes
C.Crown and chocks
D.Swivel and stabilizer bar
第3题:
On an anchor windlass,the wheel over which the anchor chain passes is called a______.
A.brake compressor wheel
B.devil's claw
C.wildcat
D.winch head
第4题:
excessive drive motor speed
excessive pump discharge pressure
too low of a tilting box angle
insufficient drive motor speed
第5题:
The opening in the deck beneath the anchor windlass that leads to the chain locker is the ______.
A.Hawse pipe
B.Fall pipe
C.Drop-pipe
D.Spill pipe
第6题:
The sprocket wheel in a windlass,used for heaving in the anchor,is called a ______.
A.capstan
B.dog wheel
C.fairlead
D.wildcat
第7题:
When attempting to free an anchor jammed in the hawsepipe,the simplest method of freeing it may be ______.
A.Starting the disengaged windlass at high speed
B.Rigging a bull rope to pull it out
C.To grease the hawsepipe
D.To pry it loose with a short piece of pipe
第8题:
Overheating of the hydraulic fluid in an electro-hydraulic anchor windlass can result from a/an( ).
A.overload on the pump motor
B.low fluid level in the reservoir
C.low fluid viscosity around the shaft seal
D.high oil level in the sump
第9题:
When the order “Let go the anchor” is received ,you should ().
第10题:
act as a chain stopper
prevent the windlass from engaging
prevent the chain from fouling on deck
control the wildcat