low exhaust back pressure
air in the fuel system
gasket blow-by or leakage
incorrect assembly of idler springs
第1题:
When using a fuel with a higher than normal sulfur content in an auxiliary four stroke diesel engine, you may
A.maintain higher than normal jacket water temperature
B.change the lube oil more frequently than normal
C.maintain a higher air-box temperature than normal
D.maintain a higher air-box pressure than normal
第2题:
A bypass line provided around a waste heat auxiliary boiler in a diesel engine exhaust system, may be used to avoid boiler ______.
A.corrosion at low engine loads
B.erosion at high engine loads
C.overload at high engine loads
D.scaling at all exhaust temperatures
第3题:
What should be prepared before disassembly of cylinder for main engine or auxiliary engine?
第4题:
the engine is overloaded
the engine is cold
there is too much lube oil in the cylinders
the turbocharger is fouled
第5题:
a broken shaft on the freshwater pump
an excessive accumulation of scale exchanger
an incorrect thermostatic element operating range
lube oil in the cooling water
第6题:
In an auxiliary diesel engine bypass type lubricating oil system, the main lube oil pump forces_______ .
A.all of the oil used by the engine through a filter
B.some of the oil used by the engine through a filter
C.some of the oil used by the engine through a centrifuge
D.all of the oil used by the engine through a centrifuge
第7题:
principle
principal
cause
case
第8题:
If an auxiliary diesel engine coolant temperature is higher than normal, but the thermostat is determined not to be defective, you would suspect a/an
A.cavitation erosion in the water jackets
B.excess corrosion inhibitor in the coolant
C.dirty jacket water cooler
D.defective turbocharger
第9题:
increase
decrease
remain the same
increase on compression decrease on expansion
第10题:
air binding of the engine cooling system
a cracked water cooled exhaust manifold
blockage in the heat exchanger
faulty operation of the thermostat