a clogged filter element
excessive lube oil pump discharge pressure
excessive lube oil flow
excessively hot lube oil
第1题:
What type of valve is used to direct the flow of hydraulic fluid?
A.relief valve
B.direction control valve
C.stop valve
D.pressure control valve
第2题:
worn cylinder liner
faulty cylinder relief valve
excessive lube oil pressure
excessive scavenge air pressure
第3题:
If the head pressure of a reciprocating refrigeration compressor is excessive
A.the relief valve should open before the high pressure cutout
B.the relief valve should open and allow the excess refrigerant to flow to the receiver
C.the high pressure cutout switch should operate before the relief valve opens
D.you should close the discharging valve
第4题:
insufficient lube oil circulating through the system
excessive circulation of lube oil through the system
insufficient refrigerant in the system
an overworked compressor
第5题:
excessive lube oil pressure
the proper seating of new rings
a worn cylinder liner
a malfunctioning cylinder relief valve
第6题:
ram relief valves bypass oil to stop rudder movement
six-way valve shifts to the neutral flow position
steering pump electric motor is de - energized by the transfer switch
follow-up gear takes the hydraulic pump off stroke
第7题:
The six-way valve opens
The steering service pump motor is stopped
The follow-up gear takes the pump off stroke
The cylinder relief valves bypass oil to the suction side the pump
第8题:
In an auxiliary diesel engine bypass type lubricating oil system, the main lube oil pump forces_______ .
A.all of the oil used by the engine through a filter
B.some of the oil used by the engine through a filter
C.some of the oil used by the engine through a centrifuge
D.all of the oil used by the engine through a centrifuge
第9题:
control the back pressure of return oil
lock the oil lines under some conditions
change the direction of oil flow
act as relief valve
第10题:
Relief valve
Direction control valve
Stop valve
Pressure control valve