The diesel oil must never be allowed to mix with the heavy fuel
The temperature of the fuel from the pre–heater should be gradually reduced after switching over the three–way valve
The heating steam to the pre-heater should be secured as soon as the diesel fuel passes through the three-way valve
The heating steam must be secured before the diesel oil passes through the three-way valve
第1题:
the same, whether at sea, or during maneuvering
adjusted during each hour of operation while at constant RPM
higher at sea than while maneuvering
lower at sea than while maneuvering
第2题:
Manually trip the over-speed device
Interrupt the fuel flow to the engine
Disengage the safety interlock
Slide the camshaft to the neutral position
第3题:
The closing of the exhaust valves used on a modern, large, low-speed, main propulsion diesel engine may be directly provided by_______.
A.large conical springs
B.compressed air pressure
C.hydraulic pressure
D.exhaust gas pressure
第4题:
increasing the quantity of starting air
increasing the lube oil pressure
heating the engine fuel supply
heating the engine coolant
第5题:
direct action of cam shaft
compressed air pressure
hydraulic “push rods”
direct action of the main piston moving down
第6题:
dial indicator
outside caliper
bridge gauge
tram rod
第7题:
excessive crankcase pressure
excessive lube oil temperature
contamination of the lube oil by water
contamination of the cooling water by lube oil
第8题:
the extra weight required for the diesel reduction gearing
a minimum speed for the engines that limits the minimum speed of the vessel
the higher fuel consumption per SHP
the low efficiency of the system when a controllable pitch propeller is used
第9题:
cooling water leaving each cylinder
fuel oil entering the injector
exhaust gases at various locations
lube oil at the bearing supplies
第10题:
fuel must be preheated
intake air should be preheated
lube oil outlet temperature should be increased 20℃ above normal
none of the above