海船船员考试
单选题As the designated rudder angle is being achieved, as a result of the original command input, the steering gear follow-up mechanism is（）A in motion, providing a null inputB not in motion, thus providing a null inputC in motion, providing an input to pla
题目
in motion, providing a null input
not in motion, thus providing a null input
in motion, providing an input to place the main pump on maximum stroke
in motion, providing an input to place the main pump at null stroke
相似问题和答案
第1题：
rudder angle indicator
A.吃水指示器
B.舱机
C.舵角指示器
D.六分仪
第2题：
The follow-up gear on an electro-hydraulic steering gear
A.relieves excessive fluid pressure
B.takes the pump off stroke when the desired rudder angle is attained
C.allows for rudder movement faster than the movement of the ship&39;s
D.returns the rudder to amidships when the wheel is release
第3题：
Rudder position is shown on the bridge by the ______.
A.rudder angle indicator
B.follow-up gaer
C.telemotor position
D.Rapson slide indicator
舵的位置是在驾驶台上通过舵角显示器显示。
第4题：
The helm command SHIFT YOUR RUDDER means ______．
A.Check the swing of the vessel
B.Double your rudder angle or go to full rudder
C.Bring your rudder amidships
D.Change from right rudder to left rudder，or vice versa，an equal number of degrees
第5题：
I hereby ______ that my vessel is fitted with a rudder angle indicator and an engine revolution indicator on the bridge in such a position that the pilot may read both without having to move away from his station； and that the rudder angle indicator and engine revolution indicator are in good working condition.
A.delay
B.state
C.delete
D.contain
第6题：
While inspecting the steering system at sea, you should check for
A.air bubbles in the sight glass
B.any leaks in the system
C.over-travel in the rudder angle indicator
D.lost motion in the rams
第7题：
Rudder position is shown on the bridge by the .
A.rudder angle indicator
B.follow-up gear
C.telemotor position
D.relief valves
第8题：
The “rudder adjustment” control on an autopilot steering stand is used to ______.
A.align the rudder angle indicator with the true rudder angle
B.set the number of degrees of rudder per degree of course error
C.set the departure from base course before actuating the rudder
D.set the rate at which the rudder responds
自动舵上“舵角调节”开关被用来调整每一度航向误差的度数。
第9题：
A tug in irons is ______.
A.rudder bound
B.being tripped by the towline
C.unable to maneuver
D.broached
第10题：
When relieving the helm，the new helmsman should know the ______．
A.Course per magnetic steering compass
B.Gyro error
C.Variation
D.Maximum rudder angle previously used