control equipment
power unit
transmission mechanisms
fittings and pipeline
第1题:
When steering by hand,which of the following may be a functional input to the steering gear as a result of turning the wheel ________.
A.Non-follow-up
B.Rudder adjustment
C.Weather adjustment
D.All the above may be activated
第2题:
The six-way valve opens
The steering service pump motor is stopped
The follow-up gear takes the pump off stroke
The cylinder relief valves bypass oil to the suction side the pump
第3题:
The_______in the steering gear move the rudder to the required angle
A.control equipment
B.power unit
C.transmission mechanisms
D.fittings and pipeline
第4题:
hydraulic steering
follow-up steering
remote control steering
air controlled steering
第5题:
modulating the oil flow with the six-way valve
moving the automatic pressure differential valve
moving the receiving telemotor which regulates the tow-way valve
varying the eccentricity of a floating ting or angle of a tilting box
第6题:
a test from the alternative power supply,if installed
timing the movement of the rudder from hard over to hard over
verification that the rudder angle indicator shows the actual position of the rudder(s)
visual inspection of the steering linkage
第7题:
the emergency lighting system for muster and abandon ship
air/oil emergency shut-down
M-Eemergency operation
main/auxiliary steering gear changing
第8题:
In ______ the control action is independent on the output.
A.a closed loop control system
B.an open loop control system
C.a boiler control system
D.a steering gear control system
第9题:
control equipment
power unit
transmission mechanisms
fittings and pipeline
第10题:
Both the main steering gear and the auxiliary steering gear should be operated
The alarms fitted to the remote control system should be operated
The emergency generator compartment should be checked
The communication system between the bridge and the steering gear compartment should be operated