cutting the old line off and renewing same
an approved servicing facility ashore
opening the case and replacing the entire line
one of the ship's officers
第1题:
Where do you obtain approved placards containing instructions for the launching and inflation of an approved inflatable liferaft?
A.Officer in Charge,Marine Inspection
B.The manufacturer of the liferaft
C.Maritime Administration
D.The owner of the vessel on which the liferafts are carried
第2题:
To determine the number of inflatable liferafts required on a vessel,you should check the ______.
A.Load Line Certificate
B.SOLAS Certificate
C.Stability Letter
D.Certificate of Inspection
第3题:
After installing a new hydraulic pump in a system, what special attention should be given to the hydraulic system?
A.The relief valves in the system should be readjusted
B.The filters and strainers should be checked frequently
C.All system pressure should be readjusted
D.The system should be drained and renewed with a fluid of different operating characteristics
第4题:
serves as a sea painter
detaches automatically
is used to rig the boarding ladder
is cut immediately as it is of no further use
第5题:
Open the liferaft casing
Turn the valve on the CO2 cylinder to start inflation
Make sure the operating cord is secured to the vessel before throwing it over the side
After inflation,detach operating cord from liferaft
第6题:
In accordance with SOLAS,the batteries that power interior lighting in inflatable liferafts can be made to last longer by ______.
A.unscrewing the bulb during the daylight
B.switching the light on only when necessary
C.taking no action as there is no way on saving power
D.taking no action as they shut off automatically in daylight
第7题:
An inflatable life raft can be launched by ______.
A.the float-free method ONLY
B.breaking the weak link on the painter
C.throwing the entire container overboard and then pulling on the operating cord to inflate the raft
D.removing the securing straps
第8题:
A safety feature provided on all inflatable liferafts is ______.
A.overhead safety straps
B.built in seats
C.internal releasing hooks
D.water stabilizing pockets
第9题:
open the CO2 inflation valve
open the raft container
ensure that the operating cord is secured to the vessel
inflate the raft on the vessel,then lower it over the side
第10题:
Load Line Certificate
SOLAS Certificate
Stability Letter
Certificate of Inspection