in the pilothouse
on top of lockers
where readily accessible
on open deck areas
第1题:
Which is TRUE concerning immersion suits and their use ________.
A.Only a light layer of clothing may be worn underneath
B.They provide sufficient flotation to do away with the necessity of wearing a life jacket
C.They should be tight fitting
D.A puncture in the suit will not appreciably reduce its value
第2题:
In order to help protect a natural fiber rope from rotting, the line must be ______.
A.dried, and stowed in a place with adequate ventilation
B.stowed in a hot, moist compartment
C.stowed on deck at all times
D.stowed in any compartment
第3题:
An immersion suit must be equipped with a(n) ______.
A.air bottle for breathing
B.orange smoke canister
C.whistle,light and retroreflective material
D.sea dye marker
第4题:
to affect the vessel's stability
not to affect the vessel's stability
to keep the vessel on even keel
not to keep the vessel on even keel
第5题:
船舶离港之前,所有的吊杆必须纵向收放好。()
第6题:
Each vessel in ocean and coastwise service must have an approved EPIRB.An EPIRB______.
A.must be stowed in a manner so that it will float free if the vessel sinks
B.is a devise that transmits a radio signal
C.must be stowed where it is readily accessible for testing and use
D.All of the above
第7题:
When the derrick is stopped, the guy must be ()(收好).
第8题:
Which statement is NOT true concerning the stowage of class 1 explosives ________.
A.Class 1.1 explosives may be stowed with class 9 dangerous substances
B.Class 1.4 explosives must be“separated from”a stow of class 5.1 oxidizing materials
C.Class 1.4 explosives may not be stowed in the same hold with class 6.1 poisons
D.Class 1.4 explosives must be“separated from”a stow of class 8 corrosive materials
第9题:
吊杆停用时,稳索必须要收起来。()
第10题:
The primary color of the suit's exterior may be red,orange or yellow
The suit must,without assistance,turn an unconscious person's mouth clear of the water within 5 seconds
The suit is flameproof and provides protection to a wearer swimming in burning oil
The suit may be stored in a machinery space where the ambient temperature is 160°F