a threaded bolt
a round pin,with a cotter pin
a threaded bolt,locknuts,and cotter pins
round pins and locknuts
第1题:
An over-speed safety device is usually fitted to a generator engine for ___ in the event of over-speed.
A.stabilizing the ship speed
B.increasing the fuel pump setting
C.braking the crankshaft
D.cutting power off the engine
第2题:
Safety shackles are fitted with ______.
A.a threaded bolt
B.a round pin,with a cotter pin
C.a threaded bolt,locknuts,and cotter pins
D.round pins and locknuts
第3题:
安全帽
A.safety belt/harness
B.safety cap
C.safety cloches
D.safety measure
第4题:
锚链吃力如何?()
第5题:
Frapping lines are fitted to lifeboat davits to ______.
A.secure the lifeboat in the davits when in the stowed position
B.bring the life boat close along the rail in the embarkation position
C.give the occupants a safety line when the boat is being lowered from the embarkation level
D.reduce the swinging of the lifeboat at the embarkation level
第6题:
Which certificate is always issued by the China Classification Society? ______.
A.Loadline certificate
B.Safety equipment certificate
C.Safety construction certificate
D.Safety cargo gear certificate
第7题:
What is acceptable flame screening ________.
A.A fitted single brass screen of 10 x 10 mesh
B.A fitted stainless steel screen of 30 x 30 mesh
C.A fitted single stainless steel screen of 15 x 15 mesh
D.Two fitted brass screens of 10 x 15 mesh spaced 1/2 inch apart
第8题:
You must________your cabe from 6 shackles to 3 shackles.
A.cut
B.pay out
C.slack
D.shorten
第9题:
Mark the joining shackles with ()paint.
第10题:
As soon as the ship gets alongside the wharf, you should lower the gangway and put a ()below it.