power the after-coolers
power the turbocharger
reduce the cylinder scavenge effect
cool the turbocharger
第1题:
The relative air pressure in the inlet manifold of a turbocharged diesel engine is usually______.
A.greater than the average exhaust manifold pressure
B.less than the average exhaust manifold pressure
C.greater at the turbine wheel than at the impeller
D.greater at reduced engine speed
第2题:
A bypass line provided around a waste heat auxiliary boiler in a diesel engine exhaust system, may be used to avoid boiler ______.
A.corrosion at low engine loads
B.erosion at high engine loads
C.overload at high engine loads
D.scaling at all exhaust temperatures
第3题:
High firing pressures and low exhaust temperature in a diesel engine may resultfrom( ).
A.decreased piston to cylinder head clearance
B.increased exhaust system back pressure
C.early fuel injection timing
D.low scavenge air temperature
第4题:
over-speeding of the engine
failure of the engine to shut down
no effect of engine mounting bolts
high exhaust temperatures
第5题:
passing the exhaust through long head pipes
diffusing exhaust vibrations through activated carbon baffles
increasing the exhaust gas velocity
reducing the exhaust gas velocity
第6题:
During the valve overlap period, the exhaust pressure of a turbocharged four-stroke/cycle diesel engine must be less than the intake manifold pressure to ensure ______.
A.effective cylinder scavenging and cooling
B.constant pressure from the turbochargers
C.cooler operation of the exhaust system
D.effective constant pressure for turbocharger operation
第7题:
increase the density of the intake air
decrease turbocharger power usage
reduce exhaust gas temperature
compensate for turbocharger PRM fluctuations
第8题:
What is the function of the after-coolers installed in the diesel engine air intake system?
A.Decrease the air density
B.Increase the exhaust temperature
C.Decrease the lube oil temperature
D.Increase the air density
第9题:
air binding of the engine cooling system
a cracked water cooled exhaust manifold
blockage in the heat exchanger
faulty operation of the thermostat
第10题:
testing for the mechanical load and the thermal load
inspecting thermal and mechanical condition of the engine
inspecting each system and exhaust temperature
testing for compress pressure and explosion pressure