leaky discharge valves on the LP cylinder
leaky discharge valves on the HP cylinder
insufficient intercooler cooling
low ambient air pressure
第1题:
Restrictions occurring in the small orifices(孔) of pneumatic control system components can be caused by ______.
A.moisture in the compressed air supply
B.excessive dryness in the compressed air supply
C.pressure surging in the compressed air receiver
D.insufficient lubrication of the system components
第2题:
damage to the un-loader operating diaphragm
an increase in current flow to the motor
high pressure in the receiver and filter
an excessive consumption of crankcase oil
第3题:
High cylinder firing pressure, accompanied by low exhaust temperature, can result from ___.
A.improper fuel rack positing
B.lengthy exhaust valve duration
C.extend operation at light load
D.excessively early injection timing
第4题:
warmer,less dense,and less stable
cool,more dense,and drier
muggy and cloudy
extremely moist with high relative humidity
第5题:
clogged air filter
compression stroke
burned exhaust valves
all of the above
第6题:
A low in a marine weather report is an air pressure system the pressure at the center of which is ______.
A.the highest over the area
B.the lowest over the area
C.higher than 1013 HPA
D.lower than 1013 HPA
第7题:
sudden evaporation of wax crystals in the lubricant
sudden evaporation of entrapped air in the lubricant
release of refrigerant from the oil/refrigerant mixture
release of dissolved lubricant from the refrigerant
第8题:
Air trapped in the hydraulic fluid of a steering system may be indicated by
A.the steering pumps overspeeding
B.a jammed open relief valve
C.a constantly occurring improper rudder response
D.excessive ram pressure
第9题:
broken valve springs
tight drive belts
high line voltage
air in the system
第10题:
cast iron has weakness
cast iron can stand up shock loading
cast iron fittings are only suitable in low pressure situation
east iron fittings are not suitable in low pressure situation