护理学相关专业知识
单选题You are preparing to install Windows 2000 Professional on 100 MPS-compliant computers. Each computer has two 550-MHz processors. The Computers are configured identically. You want to use one of the computers as a reference computer for deploying Window
题目
Use Setup Manager to configure the reference computer, and then create a disk image.
Use the System Preparation Tool with the -pnp parameter to set up the reference disk, and then create a disk image.
Use Device Manager to add the appropriate hardware abstraction layer (HAL) to the reference computer to support the second processor, and then Create a disk image.
After imaging the reference computer, restart the reference computer in safe mode and add the driver for the second processor.
参考答案和解析
相似问题和答案
第1题：
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）
A.Install service pack 4 on all windows 2000 professional computers.
B.Upgrade the windows 2000 professional computers to windows XP SP2.
C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.
D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
第2题：
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）
- A、Configure Windows 2000 Professional to enable driver signing.
- B、Configure Windows 2000 Professional to disable driver signing.
- C、Start the computer by using the recovery console， restore the system state data.
- D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
- E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
正确答案:A,D
第3题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.
What should you do?
A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
B．Disable the disk compression in Windows NT Workstation.
C．Install service pack four or later in Windows NT Workstation.
D．Install the distributed file system client on the Windows NT Workstation.
解析：Explanation: In this scenario a computer should be configured for a dual boot between Windows NT Workstation and Windows 2000 Professional. Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
Incorrect answers:
A: Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
B: Disabling the disk compression in Windows NT Workstation will not enable Windows NT Workstation to use the NTFS 5.0 file system. Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
D: Neither Windows 2000 Professional nor Windows NT Workstation 4.0 support a distributed file system client. Therefore this solution is not appropriate for this scenario.
第4题：
You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer. You start the computer in Safe Mode. What should you do next?（）
- A、Remove the sound card device driver by enabling driver signing.
- B、Remove the sound card device driver by disabling driver signing.
- C、Disable the sound card device driver by using the disable command.
- D、Disable the sound card device driver by using computer management.
正确答案:D
第5题：
You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）
- A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver.
- B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one.
- C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one.
- D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
正确答案:A
第6题：
Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.
Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.
What should you do?
A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.
B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.
C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.
D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.
解析：Explanation:WeneedtoenabletheWindows2000ProfessionalclientstoprinttotheprintdevicesattachedtotheUNIXcomputers.ThesimplestwayistocreatesharedprintersonaWindows2000Servercomputer,andconfiguretheWindows2000Professionalclientstoconnecttothesharedprinters.IncorrectAnswers:A:SimpleTCP/IPServicesisnotrelevanttoWindows2000printing.B:ThisanswerishowyoucouldconfigureUNIXclientstousetheprintdevices.WeneedtoenabletheWindows2000Professionalclientstousetheprintdevices.C:ItisnotnecessarytodisconnecttheprintdevicesfromtheUNIXcomputersandconnectthemtotheWindows2000Servercomputer.Therefore,thisisnotthesimplestsolution.
第7题：
Your company has servers that run Windows Server 2008. All client computers run Windows XP Service Pack 2 （SP2）. Windows 2003 Professional， or Windows Vista. You need to ensure all computers can use the IPv6 protocol. What should you do（）
- A、Install Serivce Pack 4 on all Windows 2000 Professional computers
- B、Upgrade the Windows 2000 professional computers to Windows XP SP2
- C、Run the IPv6.exe tool on the Windows 200 Professional and Windows XP computers
- D、Install Active Directory Client extention （DSClient.exe） on the Windows 2000 Professional and Windows XP computers.
正确答案:B
第8题：
You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.
You want to accomplish the following goals:
1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
2. Existing user environments will be maintained on the Windows 2000 Professional computers.
3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.
4. The RIS image and the upgraded applications will be enabled as they are added to the network.
You take the following actions:
1. Install the RIS image on a Windows 2000 Professional computer named Computer1.
2. Install the upgraded applications on Computers1.
3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.
4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.
5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.
Which result or results do these actions produce? (Choose all that apply.)
A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
B．Existing user environments will be maintained on the Windows 2000 Professional computers.
C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.
D．The RIS image and the upgraded applications will be enabled as they are added to the network.
解析：Explanation: The following steps are taken:
The RIS image is created then the applications are installed on Computer1 before the new RIS image was created using the RIPrep utility. All the applications will be included in this image. Furthermore, you have loaded the new RIS image on to the RIS server, started all of the Windows 2000 Professional computers, and then loaded the RIS image from the RIS server. Unattended installations of the upgraded applications will thus be performed.
Incorrect answers:
B: The hard drives on the computers are overwritten when the new RIS image is loaded. Therefore the existing user environments will not be maintained but will be replaced.
C: No special action is taken to handle the naming of the Windows 2000 Professional computers. The renaming of Computer1 to %DMI_SERIAL_NUM% does not accomplish the naming of the Windows 2000 Professional computers.
第9题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）
- A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
- B、 Disable the disk compression in Windows NT Workstation.
- C、 Install service pack four or later in Windows NT Workstation.
- D、 Install the distributed file system client on the Windows NT Workstation.
正确答案:C
第10题：
You are the administrator of ExamSheet.net's network. You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver." The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）
- A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers.
- B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable Windows File Protection
- C、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File Protection
- D、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation
正确答案:D