护理学相关专业知识
单选题You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you ins
题目
Update the HAL to support multiple processors.
In Device Manager， disable the direct memory access controller.
Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor.
Reinstall Windows 2000 Professional to support a multi-processor configuration.
相似问题和答案
第1题：
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）
A.Install service pack 4 on all windows 2000 professional computers.
B.Upgrade the windows 2000 professional computers to windows XP SP2.
C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.
D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
第2题：
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）
- A、Configure Windows 2000 Professional to enable driver signing.
- B、Configure Windows 2000 Professional to disable driver signing.
- C、Start the computer by using the recovery console， restore the system state data.
- D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
- E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
正确答案:A,D
第3题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.
What should you do?
A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
B．Disable the disk compression in Windows NT Workstation.
C．Install service pack four or later in Windows NT Workstation.
D．Install the distributed file system client on the Windows NT Workstation.
解析：Explanation: In this scenario a computer should be configured for a dual boot between Windows NT Workstation and Windows 2000 Professional. Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
Incorrect answers:
A: Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
B: Disabling the disk compression in Windows NT Workstation will not enable Windows NT Workstation to use the NTFS 5.0 file system. Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
D: Neither Windows 2000 Professional nor Windows NT Workstation 4.0 support a distributed file system client. Therefore this solution is not appropriate for this scenario.
第4题：
You are the network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. All client computers run either Windows XP Professional or Windows 2000 Professional. All client computer accounts are located in an organizational unit （OU） named Workstation. A written company policy states that the Windows 2000 Professional computers must not use offline folders. You create a Group Policy object （GPO） to enforce this requirement. The settings in the GPO exist for both Windows 2000 Professional computers and Windows XP Professional computers. You need to configure the GPO to apply only to Windows 2000 Professional computers. What are two possible ways to achieve this goal？（）
- A、 Create a WMI filter that will apply the GPO to computers that are running Windows 2000 Professional.
- B、 Create a WMI filter that will apply the GPO to computers that are not running Windows XP Professional.
- C、 Create two OUs under the Workstation OU. Place the computer accounts for the Windows XP Professional computers in one OU， and place the computer accounts for the Windows 2000 Professional computers in the other OU. Link the GPO to the Workstation OU.
- D、 Create a group that includes the Windows XP Professional computers. Assign the group the Deny - Generate Resultant Set of Policy（Logging） permission.
- E、 Create a group that includes the Windows 2000 Professional computers. Assign the group the Deny - Apply Group Policy permission.
正确答案:A,B
第5题：
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）
- A、Install service pack 4 on all windows 2000 professional computers.
- B、Upgrade the windows 2000 professional computers to windows XP SP2.
- C、Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.
- D、Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
正确答案:B
第6题：
You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.
You notice that users can still save files to drive D.
You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?
A．Use Windows 2000 Professional to configure drive D as a dynamic volume.
B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.
C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.
D．Reinstall Windows NT workstation after configuring the disk code task.
解析：Explanation: To prevent both Windows NT 4.0 Workstation and Windows 2000 Professional users from writing to the D drive, NTFS permissions must be used. For example, it could be used to deny users write permission.
Incorrect answers:
A: Configuring drive D as a dynamic volume would prevent Windows NT 4.0 Workstation users accessing drive D; however, Windows 2000 Professional users would still be able to access the drive.
B: Enabling EFS on drive D would prevent access to drive D from within Windows NT.
D: Neither Windows NT 4.0 Workstation nor Windows 2000 Professional supports a disk code task.
第7题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）
- A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
- B、 Disable the disk compression in Windows NT Workstation.
- C、 Install service pack four or later in Windows NT Workstation.
- D、 Install the distributed file system client on the Windows NT Workstation.
正确答案:C
第8题：
You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.
You want to accomplish the following goals:
1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
2. Existing user environments will be maintained on the Windows 2000 Professional computers.
3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.
4. The RIS image and the upgraded applications will be enabled as they are added to the network.
You take the following actions:
1. Install the RIS image on a Windows 2000 Professional computer named Computer1.
2. Install the upgraded applications on Computers1.
3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.
4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.
5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.
Which result or results do these actions produce? (Choose all that apply.)
A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
B．Existing user environments will be maintained on the Windows 2000 Professional computers.
C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.
D．The RIS image and the upgraded applications will be enabled as they are added to the network.
解析：Explanation: The following steps are taken:
The RIS image is created then the applications are installed on Computer1 before the new RIS image was created using the RIPrep utility. All the applications will be included in this image. Furthermore, you have loaded the new RIS image on to the RIS server, started all of the Windows 2000 Professional computers, and then loaded the RIS image from the RIS server. Unattended installations of the upgraded applications will thus be performed.
Incorrect answers:
B: The hard drives on the computers are overwritten when the new RIS image is loaded. Therefore the existing user environments will not be maintained but will be replaced.
C: No special action is taken to handle the naming of the Windows 2000 Professional computers. The renaming of Computer1 to %DMI_SERIAL_NUM% does not accomplish the naming of the Windows 2000 Professional computers.
第9题：
You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）
- A、 Update the HAL to support multiple processors.
- B、 In Device Manager， disable the direct memory access controller.
- C、 Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor.
- D、 Reinstall Windows 2000 Professional to support a multi-processor configuration.
正确答案:A
第10题：
You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）
- A、Windows 2000 Server >> Network >> Binding >> Server >> TCP/IP on the top.
- B、Windows 2000 Server >> Network >> Binding >> Workstation >> TCP/IP on the top.
- C、Windows 2000 Professional >> Network >> Binding >> Server >> TCP/IP on the top.
- D、Windows 2000 Professional >> Network >> Binding >> Server >> TCP/IP on the bottom.
- E、Windows 2000 Professional >> Network >> Binding >> Workstation >> TCP/IP on the top.
- F、Windows 2000 Professional >> Network >> Binding >> Workstation >> TCP/IP on thebottom.
正确答案:E