单选题A new server was installed. Most clients are located in the same subnet as the server and can successfully access the server. Clients located on different subnets have been unable to access the server， but have no trouble accessing other servers on the

第1题：

You have a VPN server named Server1 and a file server named Server2. Both servers run Windows Server 2003 Service Pack 2 (SP2). VPN clients report that they cannot access shares on Server2 after connecting to Server1. You confirm that VPN clients receive the appropriate IP configurations and that they have permissions to the shared folders on Server2. You need to ensure that VPN clients can access the shares on Server2 when they connect to the network by using a VPN connection.  What should you do? （）

• A、From the Routing and Remote Access snap-in on Server2， enable IP Routing.
• B、From the Routing and Remote Access snap-in on Server2， enable Link Control Protocol （LCP） extensions.
• C、From Utility Manager on Server1， enable the Start automatically when I log on option.
• D、In the local security policy on Server2， configure the Network Access： Shares that can be accessed anonymously setting.

第2题：

The staff is not able to access a database server.  The server has an ’Operating System not found’error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the SAN and access the same switch and data as this database server. Which of the following is the MOST likely cause of the problem？（）

• A、The SAN is offline
• B、Fiber channel switch
• C、Multiple failed drives in the SAN
• D、HBA

第3题：

第4题：

You have two Exchange Server 2010 servers that have the Client Access， Hub Transport， and Mailbox server roles installed.The servers are members of a database availability group （DAG）.You need to ensure that all users can access the Client Access server if a single server or service fails.What should you do？（）

• A、from DNS manager， create two new records for the Client Access servers.
• B、from Failover Cluster Manager， create a new service named Client Access Server and assign a new IP address.
• C、Install the Network Load Balancing feature on each server and assign a second IP address to each network adapter.
• D、Deploy a hardware load balancer.Create a DNS record for the virtual IP address and configure a Client Access server array.

第5题：

Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）. You have a member server named Server1 that is configured as a DHCP server. You install a new stand-alone server named Server2 in the same subnet as Server1. You install the DHCP service on Server2.You need to ensure that Server2 can assign IP configurations to clients on the subnet.  What should you do first？（）

• A、Join Server2 to the domain.
• B、Restart the DCHP Server service on Server1.
• C、From the DHCP snap-in on Server1， add Server2 by using the Add Server option.
• D、From the DHCP snap-in on Server2， add Server 1 by using the Add Server option.

第6题：

A Windows file server has run out of space. In the interim the administrator is moving sever alarchived  confidential folders that have been encrypted off the file server and onto an older servers fileshares. After the move， a manager reports that they are able to access and modify some of the items that have been moved.  Which of the following is the MOST likely issue？（）

• A、 The temporary server was formatted as NTFS.
• B、 The manager is a power user on the temporary server.
• C、 The temporary server was formatted as FAT32.
• D、 The manager is an administrator on the temporary server.

第7题：

An administrator gets a call that multiple users do not have network access to the company server that they have been using for five years. Users can access the other servers and computers in the building and check their home email accounts. The administrator tests the server’s Ethernet cable，verifies it works， and plugs it back into the NIC only to receive no status lights.  Which of the following BEST indicates the problem？（）

• A、The DNS server is down.
• B、The NIC driver on the server is malfunctioning.
• C、The DHCP server is down.
• D、The server’s NIC is malfunctioning.

第8题：

第9题：

You are the administrator of B & G Enterprises. Your Windows 2000 Server is configured to use the NWLink IPX/SPX compatible protocol. Your network clients also use NWLink IPX/SPX protocol. Your clients complain that they are not able to connect to the Windows 2000 Server； they can however connect to each other. What is the most likely cause of the problem？ （）

• A、The SUBNET Mask was set incorrectly.
• B、File permissions were set to no access.
• C、An incorrect frame type was selected on the server.
• D、The workstation service on the Windows 2000 Server failed to start.

第10题：

You have an Exchange Server 2010 organization.  The organization contains two servers named Server1 and Server2.  Server1 and Server2 have the Mailbox server role and the Hub Transport server role installed. Server 1 and Server2 are members of a database availability group （DAG）.  You need to plan the deployment of Client Access servers to meet the following requirements： .Users must be able to access their mailboxes if a single server fails .Users must not attempt to connect to a failed server  What should you include in your plan？（）

• A、On Server1 and Server2， install the Client Access server role. Implement failover clustering.
• B、On Server1 and Server2， install the Client Access server role. Configure network interface card （NIC） teaming on each server.
• C、Deploy two new Client Access servers. Implement load balancing by using DNS round robin.Create a Client Access server array.
• D、Deploy two new Client Access servers. Implement load balancing by using a Windows Network Load Balancing cluster. Create a Client Access server array.