单选题When configuring VLANs on an autonomous access point，what must be configured on theconnected switchport？（）A 802.1q trunkingB VTP trunkingC ISL trunkingD DPT trunking

第1题：

You need to set up a Company AP to act as a wireless repeater.  What are three characteristics of  this wireless repeater topology？（）

• A、 The recommended overlap of the access point on the wired LAN and the wireless repeater is  25%.
• B、 Autonomous access points are required.
• C、 The SSID of the root access point must be configured on the repeater access point.
• D、 The recommended overlap of the access point on the wired LAN and the wireless repeater is  50%.
• E、 Lightweight access points are required.
• F、 The recommended overlap of the access point on the wired LAN and the wireless repeater is  75%.
• G、 The SSID of the root access point must be distinct from that of the repeater access point.

第2题：

Which statement about data center access layer design modes is correct?（）

• A、The access layer is the first oversubscription point in a data center design.
• B、When using a Layer 2 loop-free design, VLANs are extended into the aggregation layer.
• C、When using a Layer 2 looped design, VLANs are not extended into the aggregation layer.
• D、When using a Layer 3 design,stateful services requiring Layer 2 connectivity are provisioned from the aggregation layer.
• E、The data center access layer provides the physical-level connections to the server resources and only operates at Layer 3.

第3题：

An 802.1x client cannot authenticate to an autonomous access point configured for multiple vlans. the native vlan does not have an ssid configured. Which one of the following links being down would prevent the clients from authenticating？（）

• A、between the radius and the access point
• B、between the client’s vlan and the wlse
• C、between the native vlan and the wlse
• D、between the client’s vlan and the radius

第4题：

A Cisco Aironet 1020 controller-based access point has been connected to a Catalyst 3550-24PWR Switch. However， when it is powered up， the access point fails. What has caused this problem？（）

• A、access point does not support 802.11h
• B、incorrect switch power supply
• C、switch port is not enabled
• D、switch does not support 802.3af
• E、access point has not been initialized with the primary controller

第5题：

In a network using cisco autonomous access points running wds. What port is used for authentication by the local authentication service on an access point？（）

• A、1813
• B、1645
• C、1646
• D、1812

第6题：

VLANs have been enabled on an autonomous access point. In order for clients associating toVLANs other than the native VLAN to receive an IP address which of the following must beconfigured？（）

• A、access point Ethernet port set to SSL trunking
• B、switchport set to 802.1q trunking
• C、switchport set to SSL trunking
• D、access point Ethernet port not set to 802.1q trunking

第7题：

If it is properly deployed，a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu on thecontroller？（）

• A、Mirror
• B、Rogue Detector
• C、Sniffer
• D、Monitor

第8题：

Vlans have been enabled on an autonomous access point. in order for clients associating to vlans other than the native vlan to receive an ip address. Which of the following must be configured？（）

• A、access point ethernet port set to ssl trunking
• B、switchport set to 802.1q trunking
• C、switchport set to ssl trunking
• D、access point ethernet port not set to 802.1q trunking

第9题：

If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）

• A、Monitor
• B、Rogue Detector
• C、Sniffer
• D、Mirror

第10题：

A Cisco Aironet 1020 controller-based access point has been connected to a Catalyst 3550-24 PWRSwitch. However， when it is powered up， the access point fails. What has caused this problem？（）

• A、access point does not support 802.11h
• B、incorrect switch power supply
• C、switch port is not enabled
• D、switch does not support 802.3af
• E、access point has not been initialized with the primary controller