This section is where you define all chassis clustering configuration.
This configuration is required for members of a chassis cluster to talk to each other.
You can apply this configuration in the chassis cluster to make configuration easier.
This section is where unique node configuration is applied.
第1题:
Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet where Mal-User is located. All other traffic should be permitted. Which firewall filter configuration do you use?()
A.
B.
C.
D.
第2题:
A. to protect the Routing Engine
B. to protect all interfaces on the device
C. to protect the Packet Forwarding Engine
D. to protect the management interface
第3题:
A.120M
B.320M
C.480M
D.600M
第4题:
What is the purpose of a chassis cluster?()
第5题:
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take effect.
第6题:
A.
B.
C.
D.
第7题:
A. It defines which devices will be sending traps.
B. It specifies where to send traps.
C. It defines the IP addresses of management systems that can access the device.
D. It specifies which devices can be polled for SNMP data.
第8题:
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
第9题:
When applying the configuration in the exhibit and initializing a chassis cluster, which statement is correct?() [edit chassis] user@host# show cluster { reth-count 3; redundancy-group 1 { node 0 priority 1; node 1 priority 100; } }
第10题:
What is the maximum number of 220V power supplies that can be in a UCS chassis?()