ping atm vci 0.100 interface at-0/1/0 end-to-end
ping atm vci 0.100 interface at-0/1/0 circuit
ping atm vci 0.100 interface at-0/1/0 far-end
ping atm vci 0.100 interface at-0/1/0 final-hop
第1题:
A. interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip unnumbered loopback0
B. interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip unnumbered loopback0
C. interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip address unnumbered loopback0
D. interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip address 0.0.0.0 255.255.255.255
第2题:
A.ping atm vci 0.100 interface at-0/1/0 end-to-end
B.ping atm vci 0.100 interface at-0/1/0 circuit
C.ping atm vci 0.100 interface at-0/1/0 far-end
D.ping atm vci 0.100 interface at-0/1/0 final-hop
第3题:
A. interface atm 5/1.1 atm pvc 1 0 101 aal5autoconfig profile ppp generic autoconfig ip
B. interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation ppp ppp authentication pap ip unnumbered loopback 1 ip access-routes
C. interface atm 5/1.1 atm pvc 1 0 101 aalmux ip encapsulation ppp ppp authentication pap ip unnumbered loopback 1 ip access-routes
D. interface atm 5/1.1 atm pvc 1 01 101 aal5snap encapsulation pppoa ppp authentication chap ip profile generic
第4题:
Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?()
第5题:
A.VPI=0,VCI=0
B.VPI=1,VCI=0
C.VPI=0,VCI=1
D.VPI=1,VCI=1
第6题:
A.Profile atm 1483 must be applied to the atm major interface.
B.The bulk-config-name used is test atm-pppoe.
C.The bulk-config-name used is test.
D.Atm-pppoe is the atm base profile.
E.Atm-pppoe is the atm level interface description.
第7题:
Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?()
A. PPP on the ATM interface
B. VPI/VCI on the dialer interface
C. IP address on the ATM interface
D. CHAP on the dialer interface
第8题:
In a Bridged 1483 network, you suspect ATM interface 6/2.1 is receiving cells but may not be transmitting them.The interface has an ATM PVC configuration of atm pvc 33 0 33 aal5snap .How do you baseline this interface and display recent ATM cell statistics?()
A. baseline atm vc atm 6/2 1 show atm vc atm 6/2 1 delta
B. baseline atm vc atm 6/2 33 show atm vc atm 6/2 33 delta
C. baseline interface atm 6/2 1 show atm vc atm 6/2 1 delta
D. baseline interface atm 6/2 33 show atm vc atm 6/2 33 delta
第9题:
What are three common reasons for ATM CRC errors?()
第10题:
You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100. Which two achieve this result?()