多选题Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?（）Aset interfaces ge-0/0/0.0 address 10.1.1.1/24Bset interfaces ge-0/0/0.0 family inet address 10.1.1.1/24Cset interfaces ge-0/0/0 unit 0 family inet address

第1题：

第2题：

第3题：

第4题：

Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address andnetwork mask of 71.33.252.17/24. A webserver with IP address 10.20.20.1 isrunning an HTTP service on TCP port 8080. The webserver is attached to the ge-0/0/0.0 interface of yourdevice. You must use NAT to make the webserver reachable from the Internet using port translation.Which type of NAT must you configure？（）

• A、source NAT with address shifting
• B、pool-based source NAT
• C、static destination NAT
• D、pool-based destination NAT

第5题：

Which command sequence shows traffic per queue for an interface?（）

• A、show interfaces queue ge-0/0/0
• B、show statistics queue detail
• C、show interfaces ge-0/0/0 statistics extensive
• D、monitor interface ge-0/0/0 queue

第6题：

第7题：

Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 in JUNOS software？（）

• A、set interfaces ge-0/3/0 unit 0 metric 10
• B、set protocols ospf reference-bandwidth 10g
• C、set interfaces ge-0/3/0 unit bandwidth 10g
• D、set protocols ospf area 0 interface ge-0/3/0 metric 10
• E、set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g

第8题：

第9题：

Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to make the HTTP service on the host reachable from the Internet. On which IP address and TCP port can Internet hosts reach the HTTP service?（）

• A、IP address 10.10.10.1 and TCP port 8080
• B、IP address 71.33.252.17 and TCP port 80
• C、IP address 71.33.251.19 and TCP port 80
• D、IP address 71.33.252.19 and TCP port 8080

第10题：

[edit groups] user@host# show node0 { system { host-name NODE0； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24； } } } } } node1 { system { host-name NODE1； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24； } } } } } In the exhibit， what is the function of the configuration statements？（）

• A、This section is where you define all chassis clustering configuration.
• B、This configuration is required for members of a chassis cluster to talk to each other.
• C、You can apply this configuration in the chassis cluster to make configuration easier.
• D、This section is where unique node configuration is applied.