set protocolbgpgroupmygrouppath-selectioncisco-non-deterministic;
set protocolbgpgroup i-bgp n-aggreator-id;
set protocolbgpgroupmygroup no-client-reflect;
set protocolbgpgroup i-bgp damping
第1题:
A. no BGP peers
B. all I-BGP peers
C. all E-BGP peers within your global AS
D. all E-BGP peers outside your global AS
第2题:
A. set protocols ospf import static-routes
B. set protocols ospf export static-routes
C. set routing-options static defaults readvertise
D. set routing-options static route 0.0.0.0/0 readvertise
第3题:
A、containing
B、contained
C、which contains
D、which contained
第4题:
A routing table contains static, RIP, and IGRP routes destined to the same network with each route set to its default administrative distance. Which route will be the preferred route?()
第5题:
A. Switch(config)# ip default-network 192.168.12.1
B. Switch(config)#ip route-default 192.168.12.1
C. Switch(config)# ip default-gateway 192.168.12.1
D. Swicth(config)# ip route 192.168.12.1 0.0.0.0
第6题:
A. set protocols bgp group mygroup path-selection cisco-non-deterministic;
B. set protocols bgp group i-bgp no-aggregator-id;
C. set protocols bgp group mygroup no-client-reflect;
D. set protocols bgp group i-bgp damping;
第7题:
A. set routing-options static route 10.1.1.1/32 no-retain
B. set routing-options static route 10.1.1.1/32 discard
C. set routing-options static route 10.1.1.1/32 reject
D. set routing-options static route 10.1.1.1/32 no-install
第8题:
A. user@host# set chassis cluster cluster-id 1 node 0 reboot
B. user@host> set chassis cluster id 1 node 0 reboot
C. user@host> set chassis cluster cluster-id 1 node 0 reboot
D. user@host# set chassis cluster id 1 node 0 reboot
第9题:
一个SRS(Signalling Route Set)中最多可以有()条ROUTE。
第10题:
You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()