The new drive’s jumper is set for master.
The new drive is connected to the secondary bus as a slave drive.
Both drives’ jumpers are set for cable select.
The old drive’s jumper is set for master and the new drive is set for slave.
第1题:
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?()
A. Disk Management
B. Services and Applications
C. Removable Storage
D. Device Manager
第2题:
When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?()
第3题:
A. The memory is failing.
B. The CPU is overheating.
C. The hard drive is not attached properly.
D. The operating system is not installed.
第4题:
On which of the following hard drive types must Bob, a technician, change the jumper setting to match the motherboard/cabling combination?()
第5题:
A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?()
第6题:
A. Set the drive up as basic
B. Format the drive to FAT32
C. Install a second hard drive
D. Set the drive as dynamic
第7题:
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?()
第8题:
A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller.Which of the following is the MOST likely cause of the problem?()
A. Both hard drives have the master jumper in place.
B. One hard drive is set as master and the other slave.
C. The hard drive data cable is reversed.
D. Both hard drives have the cable select jumper in place.
第9题:
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server, the technician discovers that the operating system does not detect the drive. After rebooting the server, the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next?()
第10题:
A technician manages a server that contains sensitive data. The server currently has two hard drives, one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data, while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives?()