单选题An administrator needs to recover an HMC due to a failed disk. The disk has been replaced, allowing the administrator to reinstall the HMC back to the required release of software. Backups of both the HMC Console Data and Upgrade Data are available. Af

第1题：

An administrator is applying a corrective service to their HMC. The corrective service has been shipped on 3 DVDs. Which action will ensure the corrective service is correctly installed？（） 

• A、Select the option to automatically reboot the HMc
• B、Select the option to automatically reboot the HMC after each disk.
• C、Shutdown all managed LPARs prior to beginning the install process.
• D、Copy all disks into the ""SERVICE"" directory and select concurrent install.

第2题：

A customer has 4 POWER6 servers managed by a Hardware Management Console （HMC）. They plan to install a second HMC for redundancy.  Which of the following statements correctlydescribes the dual HMC environment？ （）

• A、 To provide the Service Agent function， both HMCs must have Service Agent enabled and a dedicated modem and phone line.
• B、 Authorized users must have the same username and password on both HMCs， so that every user of one HMC is automatically authorized on the other.
• C、 Both HMCs are automatically notified of any changes that occur in the managed systems， so results of changes made to the managed system by one HMC are visible on the
• D、 Both HMCs must be running the same software revision. Software maintenance must be performed on both HMCs at the same time， but one HMC should be disconnected from

第3题：

第4题：

An administrator needs to recover an HMC due to a failed disk. The disk has been replaced, allowing the administrator to reinstall the HMC back to the required release of software. Backups of both the HMC Console Data and Upgrade Data are available. After reloading the HMC with the Recovery DVDs, what are the next steps to restore the HMC configuration?（）

• A、Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..
• B、Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade Data.
• C、Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then the Upgrade Data.
• D、Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data, and then the HMC Data.

第5题：

The IP address of POWER6 595 is showing up in the HMC instead of the server name.Next to the IP address is the status，which shows Failed Authentication.The system administrator needs to enter a password.  Which password is needed to restore connection for the POWER6 595 to the HMC？（）

• A、The hscroot user password.
• B、The CE password.
• C、The HMC password.
• D、The ASM admin password.

第6题：

An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC?（）

• A、An additional switch for the new HMC
• B、Asynchronous adapters on the new HMC
• C、The two 570 servers are directly connected to the new HMC
• D、One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC

第7题：

The HMC software has just been upgraded remotely via the WebSM client. It now needs to be rebooted to make the update active. How can this be accomplished?（）

• A、Use ssh to connect to the HMC and reboot
• B、The upgrade will display complete and ask you to reboot
• C、Select shutdown in the Management section of the WebSM client
• D、Once logged out of the WebSM client it will ask to logoff, shutdown or reboot. Select reboot.

第8题：

An administrator has an existing HMC and POWER6 570 connected to a network switch.  The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC？（）

• A、An additional switch for the new HMc  
• B、Asynchronous adapters on the new HMc
• C、The two 570 servers are directly connected to the new HMc  
• D、One 570 is directly connected to the new HMC and the other is directly connected to the existing HMc

第9题：

A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）

• A、The profile data was not initialized after restoring the backup CD
• B、The profile data was not backed up before doing the Critical Console Data backup
• C、A Critical Console Data backup was performed which backs up user data， but not profile data
• D、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

第10题：

Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC. What is required to support this environment?（）

• A、Free up one HMC and update the software for use with the p5 570
• B、Connect the new p5 570 server to an existing HMC and manage the p690s and p5 570 from that HMC
• C、Order a new HMC to support the new p5 570 server since the CR3 HMC is not supported for a p5 570
• D、Backup the HMC to DVD-RAM and select HMC migrate to move all the profile data to the new HMC software