Shutdown the server and boot it into SMS.Select SMS menu option OS Upgrade,Preservation install for the install type,and allow upgrade to run
Shut down the server and perform a network boot from a local NIM server.Select Presevation install for the install type,and allow upgrade to run
Shutdown the server and boot it into SMS.Select SMS menu option OS Upgrade,Presevation install for the install type,and allow for upgrade to run
Re-boot the server and NFS mount the bos images from a local NIM server.Run smit install.Select Presevation install for the install type,and allow upgrade to run
第1题:
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.
The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.
Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.
You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?
A.On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.
B.On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
C.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
D.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
第2题:
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.
You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.
What should you do? (Choose all that apply)
A.Convert the system partition to NTFS.
B.Install service pack4 or later on the server.
C.Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.
D.Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
第3题:
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.
You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.
What should you do?
A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.
B.On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.
C.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.
D.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
第4题:
In a workgroup, all of the following steps are required for a DHCP server EXCEPT:()
第5题:
A. activate the scopes.
B. authorize the server.
C. configure the scopes.
D. install DHCP service.
第6题:
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.
Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.
You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.
What should you do?
(Each correct answer presents part of the solution. Choose two.)
A.Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0
B.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.
C.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.
D.Make any user accounts on Ezonexam1 members of Domain Global groups.
E.Convert the Windows 2000 domains to native mode.
第7题:
An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?()
A. Processor failure
B. Third party memory
C. Disk drive failure
D. ESD during the upgrade
E. Backplane failure
第8题:
You are the administrator of a SQL server computer. The server is running SQL Server 6.5 and SQL Server 7.0.
You install a named instance of SQL Server 2000, and then run the SQL server upgrade wizard. On the database selection screen, some of the SQL Server 6.5 databases are not listed.
You cancel the SQL Server upgrade wizard.
You need to ensure that the SQL Server 6.5 databases are listed in the wizard. What should you do?
A.Uninstall SQL Server 7.0, and then rerun the SQL Server upgrade wizard.
B.Run the Microsoft SQL Server-switch application, and then rerun the SQL Server upgrade wizard.
C.Create a data transformation services package that imports the databases from SQL Server 6.5 to SQL Server 2000, and then execute the package.
D.Uninstall SQL Server 2000, and then reinstall SQL Server 2000 as the default instance.
第9题:
A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work?()
第10题:
A technician has found that the uninterruptible power supply (UPS) connected to a server does not have sufficient battery power to allow the server to shutdown gracefully. Which of the following is the MOST cost effective way to allow this server to shutdown gracefully?()