单选题A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）A VLANB zoningC tru

第1题：

Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）

• A、 The switch receives the FCoE frame and forwards it to another switch over its VE port.
• B、 The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.
• C、 The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.
• D、 The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.

第2题：

A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）

• A、4
• B、3
• C、2
• D、8

第3题：

第4题：

A customer has two locations that host their pSeries servers.  Traffic is being routed through the public Internet.  The customer needs to exchange confidential financial data between the servers.  Which of the following solutions should the pSeries technical specialist propose to the customer to secure the data？（）

• A、A DCE domain
• B、A Kerberos domain
• C、A PPP tunnel between the servers
• D、An IPSEC tunnel between the servers

第5题：

A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）

• A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch
• B、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch
• C、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.
• D、The NPIV switch will count against the number of domains in a fabric

第6题：

Which of the following is the correct configuration for a RAID 5 array?（）

• A、A two disk set with one data strip
• B、A three disk set with two data strips and a parity strip
• C、A two disk set with two data strips
• D、A four disk set with two sets of data strips

第7题：

A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）

• A、VLAN
• B、zoning
• C、trunking
• D、LUN masking

第8题：

第9题：

A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）

• A、operator training
• B、cache size of the two clusters
• C、fibre bandwidth capability between the sites
• D、number of stacked tape drives attached to each cluster

第10题：

A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）

• A、Dual power supplies.
• B、Twice the amount of disk.
• C、Two dual-port LHEA adapters.
• D、Two dual-port fibre channel adapters.