The 4X CD-ROM drive has dirty optics or laser and requires cleaning.
The 4X CD-ROM drive needs to be jumpered to support CD-RW disks.
The 4X CD-ROM drive does not support the multi-read specification.
The 4X CD-ROM is fine, but the CD-RW disk has a flaw in its format.
第1题:
Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.
When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".
What should you do?
A.Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.
B.Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.
C.Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.
D.Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
第2题:
A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?()
第3题:
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Modify the Boot.ini file.
B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
C. Select Safe Mode from the Windows 2000 boot menu.
D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
E. Install a driver for the RAID controller form. a floppy disk.
F. Use Device Manager to update the driver for the RAID controller.
第4题:
The error ’invalid boot disk’ means:()
第5题:
As a Company employee you are the desktop administrator of a Windows 2000 Professional computer. The Windows 2000 Professional computer has 25 MB of free disk space drive C and 800 MB of free disks pace on drive E. You are unable to print large documents because if inadequate disk space on drive C. You want to be able to use the space on drive E to print large documents. What should you do? ()
第6题:
A customer receives a CD-RW disk from a computer vendor. The customer tries to read the disk in a computer with a 4X CD-ROM drive and is unable to read any information. The customer tries the CD-RW disk on a 32X CD-ROM drive and it reads correctly. What is the cause of this problem?()
第7题:
A customer needs 2 TB of high availability storage for eBusiness applications. Their servers arecurrently connected to two EMC Symmetrix subsystems that are running RAID 1. They want toconsolidate all of the RAID 1 storage into an IBM System Storage DS6800. Which configurationsatisfies these capacity requirements?()
第8题:
A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?()
A. Reboot the computer
B. Remove the drive and reinstall
C. Install the device driver
D. Flash the BIOS
第9题:
A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?()
第10题:
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?()