微软认证
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.Th
题目
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
相似问题和答案
第1题：
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.
Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.
You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?
A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.
B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.
C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.
D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
解析：Explanation:Windows2000printersautomaticallyallowWindows2000printerclientstodownloadthecorrectprinterdriver.However,down-levelclients,likeWindowsNT4.0,Windows95andWindows98wouldnotbeabletodownloadprinterdriversautomaticallyiftheWindows2000printserverdoesnothavethedown-levelprinterdrivers.Thesecanbeinstalledseparatelyontheprintserverthoughandthedown-levelclientswouldthenenjoythesameautomaticinstallationofprinterdrivers.Incorrectanswers:A\B\D:ThedriversshouldbeinstalledontheWindows2000printservernotcopied.
第2题：
Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.
Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.
What should you do?
A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.
B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.
C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.
D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.
解析：Explanation:WeneedtoenabletheWindows2000ProfessionalclientstoprinttotheprintdevicesattachedtotheUNIXcomputers.ThesimplestwayistocreatesharedprintersonaWindows2000Servercomputer,andconfiguretheWindows2000Professionalclientstoconnecttothesharedprinters.IncorrectAnswers:A:SimpleTCP/IPServicesisnotrelevanttoWindows2000printing.B:ThisanswerishowyoucouldconfigureUNIXclientstousetheprintdevices.WeneedtoenabletheWindows2000Professionalclientstousetheprintdevices.C:ItisnotnecessarytodisconnecttheprintdevicesfromtheUNIXcomputersandconnectthemtotheWindows2000Servercomputer.Therefore,thisisnotthesimplestsolution.
第3题：
You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.
You want to accomplish the following goals:
1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
2. Existing user environments will be maintained on the Windows 2000 Professional computers.
3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.
4. The RIS image and the upgraded applications will be enabled as they are added to the network.
You take the following actions:
1. Install the RIS image on a Windows 2000 Professional computer named Computer1.
2. Install the upgraded applications on Computers1.
3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.
4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.
5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.
Which result or results do these actions produce? (Choose all that apply.)
A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
B．Existing user environments will be maintained on the Windows 2000 Professional computers.
C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.
D．The RIS image and the upgraded applications will be enabled as they are added to the network.
解析：Explanation: The following steps are taken:
The RIS image is created then the applications are installed on Computer1 before the new RIS image was created using the RIPrep utility. All the applications will be included in this image. Furthermore, you have loaded the new RIS image on to the RIS server, started all of the Windows 2000 Professional computers, and then loaded the RIS image from the RIS server. Unattended installations of the upgraded applications will thus be performed.
Incorrect answers:
B: The hard drives on the computers are overwritten when the new RIS image is loaded. Therefore the existing user environments will not be maintained but will be replaced.
C: No special action is taken to handle the naming of the Windows 2000 Professional computers. The renaming of Computer1 to %DMI_SERIAL_NUM% does not accomplish the naming of the Windows 2000 Professional computers.
第4题：
You work as one of ten network administrators at theBostonoffice of Ezonexam.com.
The Ezonexam.com network includes Windows 2000 Professional client computer, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Ezonexam employees who use the Windows operating systems stores files on a shared folders on a Windows 2000 Server computer that is named EzonexamFileServerA.
You are now required to make the shared folders on EzonexamFileServerA available for the Ezonexam staff that uses UNIX computers.
What action should you take?
A．Install and configure NFS (Network File System) on EzonexamFileServerA.
B．Configure data volumes on EzonexamFileServerA to be FAT volumes.
C．Disable Server Message Block (SMB) signing on EzonexamFileServerA.
D．Install Simple TCP/IP Services on EzonexamFileServerA.
解析：Explanation:NetworkFileSystem(NFS)allowsuserstomountremotedirectoriesanddiskssothattheyappearaslocaldrives.AllmajorUNIXoperatingsystems-includingDIGITALUNIX-havebuilt-inNFSfile-sharingcapabilities.NFSforWindowsplatformscomesintwovarieties.NFSclientproductsfortheWindows,Windows95,Windows98,andWindowsNT/Windows2000operatingsystemenvironmentsallowclientstogainaccesstofilesandprintersthatexistonUNIXservers.NFSserverproducts-mostcommonlyforWindowsNT/Windows2000Serverenvironments-allowsUNIX-basedworkstationsandserverstogainaccesstofilesandprintersonsystemsrunningWindowsNT/Windows2000.
第5题：
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.
You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.
What should you do?
A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.
B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.
C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.
D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.
第6题：
You are the administrator of your company's network. The network is configured as shown in the exhibit.
You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.
You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.
What should you do?
A．Add a computer running DHCP Relay Agent to the marketing segment.
B．Add a computer running the network monitor driver to the marketing segment.
C．Move the Windows 2000 Server computer running WINS to the marketing segment.
D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.
解析：Explanation: RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isn't RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server will not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP configuration, and connect to the RIS server.
Incorrect answers:
B: Network monitor driver is used to monitor network traffic. It cannot solve the problem in this scenario and is thus inappropriate.
C: In addition to a DHCP server, the RIS server requires the presence of a DNS server running Active Directory. As DNS and Active Directory are present in the exhibit, there is no need for the WINS server. Both WINS and DNS with Active Directory are responsible for name resolution. A WINS server is required for compatibility with older versions of Windows and with non-Windows computers.
D: A DHCP server, a DNS server and Active Directory is available on this network. These servers and services are required for RIS. However the RIS server cannot access the DHCP server as the router is not RFC-1542 compliant.
第7题：
You are the network administrator for Ezonexam. You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.
What should you do? (Each correct answer presents part of the solution. Choose two)
A．On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.
C．Start the new computer by using a Windows 98 network boot disk.
D．Connect to \\Ezonexam1\I386 and run Winnt32.exe.
E．Connect to \\Ezonexam1\I386 and run Winnt.exe.
解析：Explanation:Windows98networkbootdiskistheonlybootdiskthatwillallowyoutoconnecttotheshare.ThishastobeusedinconjunctionwithrunningtheWinnt.execommandwhichiscommonlyusedforover-the-networkinstallationsthatuseanMS-DOSnetworkclient.Winnt.exeperformsthefollowingsteps:1.Createsa$WIN_NT$.~BTtemporarydirectoryonthesystempartitionandcopiesSetupbootfilesintothisdirectory.2.Createsa$WIN_NT$.~LStemporarydirectoryandcopiestheWindows2000filesfromtheserverintothisdirectory.3.Promptsuserstorestarttheirsystems.Afterthecomputerrestarts,thebootmenuappearsandinstallationcontinues.Winnt.exeinstallsWindows2000ServerandcanbeexecutedfromanMS-DOSoraWindows16-bitoperatingsystemcommandprompt.Wemustusewinntandnotwinnt32asthebootdisksoperateinDOSmode,whichworkswith16-bitapplications.Wewouldthusnotbeabletouse32-bitapplicationslikewinnt32.Incorrectanswers:A:Thisoptionwillnotallowyoutoconnecttothesharefromwhereyouneedtogetthesourcefiles.B:ItisthenewcomputerthathastobeinstalledandnottheWindows2000servercomputer.D:RunningWinnt32.exeisnotmeantforusewithDOS-basedbootdisk.Thisoptionwillthusnotsuffice.
第8题：
The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.
You want to prevent all users from browsing the network.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A．Create a Windows Group Policy that denies user access to My Network Places.
B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.
C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.
D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.
E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.
解析：Explanation: The primary domain controller (PDC) is the server that maintains the master copy of the domain's user-accounts database and that validates logon requests. Prior to Windows 2000 every Windows NT network domain was required to have one, and only one, PDC. If you want to deny users of the terminal server browsing ability of the Network Neighborhood, you should create a group policy that denies access to My Network Places. (Microsoft is colloquially stuck with Network Neighborhood for My Network Places.)
第9题：
You are the administrator for your company's network. The network is configured as shown in the exhibit.
You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.
You create a RIS image. You load the image onto the RIS server. You then start the new computers.
You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.
What should you do?
A．Add a Windows 2000 Server computer running WINS to the network.
B．Add a Windows 2000 Server computer running DHCP to the network.
C．Add the domain Everyone group to the RIS OS image security settings.
D．Place the new computers on the same segment as the RIS server.
解析：Explanation:RIShasthefollowingrequirements:(1)DNSserver,(2)DHCPserverand(3)ActiveDirectory(Windows2000DomainController)TheexhibitshowsthepresenceofActiveDirectoryandDNS,butalackofaDHCPserver.WemustthereforeaddaDHCPserver.Incorrectanswers:A:RISdoesnotuseWINSatall.RISrequiresDNSfornameresolution.C:ThereshouldbenoneedtomanuallyconfigurefilepermissionsontheRISOSimage.D:MovingthenewcomputersintothesamesegmentwillnotworksincethereisnoDHCPserverpresent.Generally,RISworkswellinnetworkswithsubnets.
第10题：
You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.
You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.
You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.
You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?
A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.
B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.
C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.
D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
解析：Explanation: We want to upgrade the NT domain to an Active Directory domain; particularly we want to migrate the NT user accounts. First we need to promote server1 to PDC since it contains the master copy of domain information - SAM. Then upgrade the PDC to Windows 2000 Server. Active Directory requires a DNS server that supports SRV (service records). The UNIX DNS server supports this.
Incorrect answers:
B: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
C: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
D: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network.