微软认证
You are the network administrator for Ezonexam.Your Windows 2000 Server computer named Ezonexam1 contains two 36-GB hard disks. Disk 0 and Disk 1. Each disk is configured as a basic disc and has a single 36-GB NTFS partition. Both partitions are backed up
题目
You are the network administrator for Ezonexam.
Your Windows 2000 Server computer named Ezonexam1 contains two 36-GB hard disks. Disk 0 and Disk 1. Each disk is configured as a basic disc and has a single 36-GB NTFS partition. Both partitions are backed up to a tape each night. The partition on Disk 1 stores user data. Most users at Ezonexam encrypt their files. Disk 1 fails. You replace it with a new hard disk and create a single NTFS partition.
You need to recover the data as quickly as possible while maintaining the security of the files on Disk 1.
What should you do?
A．Restore the contents of Disk 1 from the most recent tape backup to a second file server. Instruct users to copy their files from the second file server to the new partition.
B．Restore the contents of Disk 1 from the most recent tape backup to a second file server. Log on to Ezonexam1 console as a recovery agent. Copy the files from the second file server to the new partition.
C．Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Instruct the users to verify the integrity of their files.
D．Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Run the cipher command to decrypt the files.
相似问题和答案
第1题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.
The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.
Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.
You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?
A．On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.
B．On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
解析：Explanation: We upgrade Ezonexam1. We have no choice that the upgraded Windows 2000 Server will be a domain controller. We are then able to use the dcpromo.exe utility to remove the Active Directory and demote the Domain controller to a member server.
Incorrect Answers
A: It is not necessary to format the stripe set containing the employee data. This proposed solution would work, but it is not the fastest method.
B: A dual-boot system is not necessary.
C: You cannot upgrade a Windows NT 4.0 domain controller to a Windows 2000 member server. The Windows 2000 Server will be a domain controller.
第2题：
You are the network administrator for Ezonexam. You are installing Windows 2000 Server on a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.
You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.
B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.
C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.
D. Create a stripped volume using Disk2, Disk3, and Disk4.
E. Create a RAID-5 volume using all disks.
F. Create a stripped volume using all disks.
G. Select the volume on Disk0 and add a mirror using Disk1.
B,C,G 解析：Explanation: RAID-5 volume is where data is written to 3 to 32 physical disks at the same rate, and is interlaced with parity to provide fault tolerance for a single disk failure. Good read performance; good utilization of disk capacity; expensive in terms of processor utilization and write performance as parity must be calculated during write operations.
Only Windows 2000 supports dynamic storage. To support dynamic storage, a single partition is created that includes the entire disk. A disk that you initialize for dynamic storage is a dynamic disk. Dynamic disks are divided into volumes, which can consist of a portion or portions of one or more physical disks. A dynamic disk can contain simple volumes, spanned volumes, striped volumes (RAID-0), mirrored volumes (RAID-1), and striped with parity volumes (RAID-5). You create a dynamic disk by upgrading a basic disk. A Mirrored volume is where two disks contain identical copies of data. The only software RAID supported on the system volume. Good read and write performance; excellent fault tolerance; but costly in terms of disk utilization, because 50 percent of the volume's potential capacity is used for data redundancy.
Incorrect answers:
A: It is not necessary to install Windows 2000 Server on a 4-GB NTFS partition on Disk0. Disk0 consists of 18-GB.
D: Striped volume is where data is written to 2 to 32 physical disks at the same rate. It offers maximum performance and capacity but no fault tolerance.
E: The main disadvantage of a RAID-5 volume is that once a drive fails, system performance suffers until you rebuild the RAID-5 volume. This is because the parity information must be recalculated through memory to reconstruct the missing drive. If more than one drive fails, the RAID-5 volume becomes inaccessible. This does not bode well for fault tolerance as is required in this question.
F: Striped volumes do not provide fault tolerance.
第3题：
You are the network administrator for Ezonexam. You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.
What should you do? (Each correct answer presents part of the solution. Choose two)
A．On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.
C．Start the new computer by using a Windows 98 network boot disk.
D．Connect to \\Ezonexam1\I386 and run Winnt32.exe.
E．Connect to \\Ezonexam1\I386 and run Winnt.exe.
解析：Explanation:Windows98networkbootdiskistheonlybootdiskthatwillallowyoutoconnecttotheshare.ThishastobeusedinconjunctionwithrunningtheWinnt.execommandwhichiscommonlyusedforover-the-networkinstallationsthatuseanMS-DOSnetworkclient.Winnt.exeperformsthefollowingsteps:1.Createsa$WIN_NT$.~BTtemporarydirectoryonthesystempartitionandcopiesSetupbootfilesintothisdirectory.2.Createsa$WIN_NT$.~LStemporarydirectoryandcopiestheWindows2000filesfromtheserverintothisdirectory.3.Promptsuserstorestarttheirsystems.Afterthecomputerrestarts,thebootmenuappearsandinstallationcontinues.Winnt.exeinstallsWindows2000ServerandcanbeexecutedfromanMS-DOSoraWindows16-bitoperatingsystemcommandprompt.Wemustusewinntandnotwinnt32asthebootdisksoperateinDOSmode,whichworkswith16-bitapplications.Wewouldthusnotbeabletouse32-bitapplicationslikewinnt32.Incorrectanswers:A:Thisoptionwillnotallowyoutoconnecttothesharefromwhereyouneedtogetthesourcefiles.B:ItisthenewcomputerthathastobeinstalledandnottheWindows2000servercomputer.D:RunningWinnt32.exeisnotmeantforusewithDOS-basedbootdisk.Thisoptionwillthusnotsuffice.
第4题：
You work as an administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed. You have received instructions to convert a basic disk to a GPT disk.Which of the following is TRUE with regards to GPT disks？（）
- A、To convert a basic disk to a GPT disk， the disk must not contain any partitions or volumes
- B、You can convert a basic disk to a GPT disk， regardless of partitions or volumes
- C、GPT is required for disks larger than 2 TB
- D、GPT is required for disks smaller than 2 TB
- E、The GPT partition style can be used on removable media
- F、GPT disks make use of the standard BIOS partition table
正确答案:A,C
第5题：
You are the network administrator for Ezonexam.
The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.
Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.
One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.
You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.
What should you do?
A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.
B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.
D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
解析：Explanation:Therearefourwaystoperform.anattendedinstallation:1.BoottoaCD-ROM,therebyinvokingthesetuproutine.2.BoottoacurrentoperatingsystemwithCD-ROMsupportandmanuallyinvokethesetuproutine.3.BoottoasetoffoursetupdisksandthenprovidetheCD-ROMwhenprompted.4.Boottoanetwork-awareoperatingsystemandinvokesetupoverthenetwork.IfyouhaveacomputerwhoseBIOSsupportsbootingfromaCD-ROM,youcansetupWindows2000Serverwithoutinstallinganoperatingsystemonyourharddriveandwithoutrequiringnetworksupport.Todoso,configureyourcomputertoboottotheCD-ROMintheBIOS.IntheabovescenariotheserverfailedandforyoutorecovertheserverasquicklyaspossibleandrecoveringasmuchdataaspossibleyouneedtousetheWindows2000ServerCDandselecttheRepairoptioninSetup.Incorrectanswers:B:Thisoptionwillnotbethebesttofollowiftheserveristoberecoveredwithintheshortestpossibletime.Youwillalsolosesomedatasincere-creatingthesharedfoldersonthefirstharddiskwouldalreadyhavedatamissingsincePartitionCiscorrupted.C:EmergencyRepairDiskenablesyoutorecoverfromRegistrysettingsthatrenderyoursysteminoperable.ThismightbemisconfigurationthatcouldnotbecaughtwiththeLastKnownGoodConfiguration,oritmightbedeleteduseraccountsorotherRegistrychanges.Thisisnotaregistryproblem.TheEmergencyRepairDiskcanbeusedtofacilitatesomesystemrepairsonyourWindows2000server.Essentially,thediskcanbeusedtorepairstartupproblems,likewhenessentialstartupfilesarenotpresentandyourServerrefusestoboot.However,thisproblemneedstobeaddressesasquicklyaspossibleandmakinguseoftheRepairoptioninSetupfromtheWindows2000ServerCDwouldbethequickermethod.D:TheRecoveryconsoleisapowerfultext-basedbootalternativeforWindows2000Server.Ifyoursystembecomessocorruptthatitwillnotbootandnootherrepairprocesswillhelp,youcanboottotheRecoveryconsoleandcopyfilestoorfromyourserver.Inaddition,youcanstopandstartservices,ifaservicethatyouhaveinstalledcausesproblemswithbooting.Thisoptiondoesnotrepresentthequickestwaytoaddresstheproblemathand.
第6题：
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
解析：Explanation: To install Windows 2000 Server on computers from source files that are located on a centralized network share we would have to connect to the network share from the the computers. If the computers do not have PXE-compliant network cards we would have to make a network boot disk that the computers can use connect to the network share. We would start the installation process by using winnt with /s /u /udf switches. We must use winnt and not winnt32 as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.
Incorrect answers:
A: Makebt32 is used to create a set of four setup floppy disks.
B: The boot diskette must include network drivers.
C: Dsclient.exe is a directory service client for Windows 9x. It cannot be used to start an installation of Windows 2000.
E: The installation process cannot be started by using a Windows 2000 emergency repair disk.
第7题：
You are the administrator of Ezonexam.com's Windows 2000 network.
Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.
You want to be able to access your project files when using either of the operating systems.
What should you do?
A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.
C．Configure Disk 2 to use Encrypting File System (EFS).
D．Configure Disk 2 as a basic volume and format the volume as FAT32.
解析：Explanation: Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.
Incorrect Answers:
B: Configuring Disk2 as a dynamic volume that is formatted as an NTFS partition will not ensure that you will be able to access your project files when making use of either operating system.
C: The Encrypting File System allows you to encrypt files on an NTFS volume so that only you can use them. This offers a level of protection beyond that provided by NTFS permissions, which you can use to restrict access to your files by others who log on to your computer. However, this does not grant access to files if the computer is configured as a dual booting system.
D: This option will not solve our problem, what you need to do is to upgrade to Windows NT Workstation 4.0 to Service Pack 4 or later.
第8题：
Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.
Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.
One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:
"Boot disk or operating system not found".
You use Recovery Console to discover that the files on partition C are corrupted.
You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.
What should you do?
A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.
B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.
D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
解析：Explanation:TheuserdataondriveDisnotharmed.WejustneedtogettheoperatingsystemondriveCoperationalagain.WeshouldusetheRecoveryConsoleandrepairthesystemfiles.WestarttheRecoveryconsolebybootingfromtheWindows2000ServerinstallationCD-ROM.Note:Iftherepairprocessdoesnotwork,wecouldreinstalltheoperatingsystemondriveC.DriveDdatawouldstillbecurrent.IncorrectAnswersA:AWindows2000computercannotbestartedbytheEmergencyRepairDiskette.B:Thereisnoneedtocopyanyfiles.AlluserfilesareonDriveD,andtheyarenotdirectlyaffectedbythecorruptedsystemfiles.D:Thesecondpartitionisnotaffectedbytheerror.Itisnotnecessarytoinstallanotherharddisk.
第9题：
You are the network administrator for Company. Your Windows 2000 Professional computer contains a single hard disk configured with two NTFS partitions C and D. You want to move a folder named Sales from the C partition to a folder named Corp on the D partition. You want the files in the Sales folder to still be compressed after moving the folder. You want the files in the Corp folder to remain uncompressed. You want to ensure that the files are recoverable in case of any disk problems. You also want to move the files with the least amount of administrative effort. What should you do?（）
- A、 Back up the Sales Folder. Move the Sales folder to the Corp folder. Compress the Sales folder.
- B、 Back up the Sales folder. Copy the Sales folder to the Corp folder.
- C、 Copy the Sales folder to a second computer. Then move the Sales folder to the Corp folder.
- D、 Run the command xcopy.exe c:/Sales d:/Corp /S /C
正确答案:A
第10题：
You are the network administrator for You administare a Windows Server 2003 computer named TestKing12. TestKing12 has a single disk. The disk is configured so that it has four primary partitions, which are formatted as FAT32. The disk also has unallocated space available. You need to use the unallocated disk space to store user data. What should you use?（）
- A、Convert all existing partitions to NTFS.
- B、Using Diskpart.exe, run the create command.
- C、Convert the disk to a dynamic disk, and create a new volume.
- D、Using Diskpart.exe, run the extend command.
正确答案:C