An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A、SATA to SCSIB、SATA to HBAC、SATA to USBD、SATA to SAS

第1题：

A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）

• A、Have the client purchase a SATA compatible system board.
• B、Have the client purchase a SATA to IDE conversion kit.
• C、Have the client return the drive and purchase an IDE compatible drive.
• D、Have the client purchase a SCSI to SATA conversion kit.

第2题：

Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）

• A、Format the partition
• B、Load any RAID or SATA drivers needed
• C、Partition the drive
• D、Configure Windows settings

第3题：

第4题：

Which of the following is the MOST likely connection type for a backup external modem？（）

• A、 IEEE 1394
• B、 SCSI
• C、 Serial
• D、 SATA

第5题：

Which of the following is eliminated when using SATA instead of PATA technology？（）

• A、Jumper selection
• B、Power connector
• C、Data port connector
• D、Hard drive LEDs

第6题：

A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）

• A、chvg
• B、rmdev
• C、reducevg
• D、exportvg

第7题：

Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）

• A、The drive will run at the lower SATA 1 speed.
• B、The drive will not work due to incompatibility.
• C、The drive will run at the higher SATA 2 speed.
• D、The drive will have intermittent POST errors.

第8题：

第9题：

Which of the following is the correct connector for an internal floppy drive?（）

• A、50-pin SCSI
• B、40-pin ribbon
• C、34-pin ribbon
• D、4-pin SATA

第10题：

An administrator is configuring RAID 1 in a server.  The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter.  How should the administrator BEST configure these drives？（）

• A、Install one drive on the first channel and install the second drive on the second channel.
• B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.
• C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.
• D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.