CMS专题
单选题A customer has two Ethernet Switch Modules installed in an IBM BladeCenter Enterprise chassis. The modules were configured identically. The Ethernet module in bay one was inadvertenly reset to factory defaults. Which solution returns the module to the
题目
Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface
Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
Back up the configuration of the Ethernet module in bay one and restore it to the Ethernet module in bay two using the AMM
Restore the configuration from NVRAM using the Switch Module Web interface
相似问题和答案
第1题：
A project requires a new server to be set up with the ability to automatically fail over its Ethernet connection to a second connection if a network failure occurs. Which of the following provides greatest resiliency？（）
- A、Two switch ports will be needed on a switch,two Ethernet cables will be needed for theserver each connecting to two different Ethernet cards,and one IP address will be needed
- B、Two switch ports will be needed on two different switches two Ethernet cables will beneeded for the server each connecting to two different Ethernet cards,and one IP address will be needed
- C、Two switch ports will be needed on two different switches,two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,two different IP addresses will be needed
- D、One switch port will be needed on one switch,a splitter will be needed to split the connection,two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,and two different IP addresses will be needed
正确答案:B
第2题：
A customer has an existing DS5300 system attached to two Brocade switches with eight Windowsservers. The customer wants to add their System i p750 server to this SAN. From the followingchoices what is the simplest and least expensive solution for this customer？（）
- A、add twofibre HBAs to the System i and connect to the SAN
- B、add twofibre HBAs to the System i and connect to the Windows Servers
- C、add twofibre HBAs to the System i and connect to the System i using VIOS
- D、add two SAS HBAs to the Systemi array and connect directly to the DS5300
正确答案:A
第3题：
A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module is powered on， but the interfaces are all in VDC0. What is the reason for this？（）
- A、 The chassis needs an EPLD upgrade to support the new module type.
- B、 The default VDC cannot support F2 modules.
- C、 The interfaces must be allocated into a VDC for F2 modules only.
- D、 The module has failed GOLD diagnostics， and the switch has isolated the ports to protect the integrity of the system.
正确答案:C
第4题：
A project requires a new server to be set up with the ability to automatically fail over its Ethernet connection to a second connection if a network failure occurs. Which of the following provides greatest resiliency？（）
- A、Two switch ports will be needed on a switch， two Ethernet cables will be needed for the server each connecting to two different Ethernet cards， and one IP address will be needed.
- B、Two switch ports will be needed on two different switches， two Ethernet cables will be needed for the server each connecting to two different Ethernet cards， and one IP address will be needed.
- C、Two switch ports will be needed on two different switches， two Ethernet cables will be needed for the server each connecting to two different Ethernet cards， two different IP addresses will be needed.
- D、One switch port will be needed on one switch， a splitter will be needed to split the connection， two ethernet cables will be needed for the server each connecting to two different Ethernet cards， and two different IP addresses will be needed.
正确答案:B
第5题：
Company.com has installed and configured a VIO server utilizing a Shared Ethernet Adapter and is investigating some network performance issues visible on the clients. The customer wants to understand the total network connectivity from the clients out to the data center routers. Which of the following commands will identify the Shared Ethernet Adapter mapping？（）
- A、ifconfig -a
- B、netstat -nr
- C、lsmap -all -net
- D、lsdev -Cc adapter
正确答案:C
第6题：
A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）
- A、Install only two modules as the RAM has to be installed in pairs
- B、Purchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parity
- C、Purchase dual channel memory. The triple channel memory may be incompatible with theserver motherboard
- D、Install the RAM.Two modules will perform as dual channel and one as single channel
正确答案:C
第7题：
An existing IBM customer has some iSeries servers in their environment. The customer is adding an x366 server with an RSA-II installed for their Microsoft Client/Server applications. The customer wants to consolidate the storage and centralize the backup of the iSeries and xSeries platforms. Which of the following will accomplish this？（）
- A、Share the data over the Ethernet LAN.
- B、Install the IXA Adapter in the iSeries server.
- C、Install the IXA Adapter in the xSeries server.
- D、Attach both servers to an IXS switch.
正确答案:C
第8题：
A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）
- A、VLAN
- B、zoning
- C、trunking
- D、LUN masking
正确答案:B
第9题：
A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used. Which of the following fulfills the customer requirements?（）
- A、Two dual-port PCIe adapters
- B、A four-port PCIe Ethernet adapter
- C、Four separate PCIe Ethernet adapters
- D、Two embedded Integrated Virtual Ethernet adapters (IVE)
正确答案:C
第10题：
Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）
- A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
- B、Use the same virtual LAN ID on each LPAR.
- C、Set up IP routing through an LPAR on each system.
- D、Set up an IP firewall through an LPAR on each system.
正确答案:A