多选题When assigning a standalone access point a non-root role， which two parameters， other than role in the radio network settings， must be configured on the ssid manager page？（）Aforce infrastructure devices to associate only to this ssidBset infrastructure

第1题：

When adding a new user and assigning a role, which user role has "read only" rights to theconfiguration and operational states? （）

• A、user
• B、read_only
• C、target_operator
• D、security_operator

第2题：

On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking， butthe status LED and Ethernet LED are both off. What does this indicate？（）

• A、A firmware upgrade is in progress.
• B、An access point buffer overflow is occurring.
• C、The internal radio has failed.
• D、The access point is booting.

第3题：

When assigning a standalone access point a non-root role， which two parameters， other than Rolein the radio network settings， must be configured on the SSID Manager page？（）

• A、Force Infrastructure Devices to associate only to this SSID
• B、Set Infrastructure SSID
• C、Multiple BSSID
• D、Set Data Beacon Rate
• E、Enable IP redirection on this SSID

第4题：

When setting an access point to a non-root role， what two parameters，other than Role in theRadio Network，must be configured on the SSID Manager page？（）

• A、Infrastructure devices to associate only to this SSID
• B、Enable IP redirection on this SSID
• C、Set Data Beacon Rate
• D、Multiple Basic Service Set Identification （BSSID）
• E、Set infrastructure SSID

第5题：

On a Cisco Aironet 1130AG Series standalone access point， the status LED is dark blue and blinking. What does this indicate？（）

• A、The internal radio has failed.
• B、A firmware upgrade is in progress.
• C、An access point buffer overflow is occurring.
• D、The access point is booting.

第6题：

When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges. Which of the following rts threshold and cwmin settings would be correct for the non-root bridges？（）

• A、rts threshold=4000，cwmin=3
• B、rts threshold=1，cwmin=4
• C、rts threshold=4000，cwmin=5
• D、rts threshold=1，cwmin=5

第7题：

When assigning a standalone access point a non-root role， which two parameters， other than Role in theradio network settings，must be configured on the SSID Manager page？（）

• A、Set Data Beacon Rate
• B、Set Infrastructure SSID
• C、Enable IP redirection on this SSID
• D、Multiple BSSID
• E、Force Infrastructure Devices to associate only to this SSID

第8题：

On a standalone access point， client association using EAP-Cisco Wireless （Cisco-LEAP） is failing， butassociation using EAP-PEAP is functioning. What needs to be enabled on the standalone access point tocorrect this issue？（）

• A、a shared key
• B、network EAP
• C、open authentication plus EAP
• D、open authentication plus MAC

第9题：

Which parameter， when enabled on a standalone access point， gives the highest priority to a voice packeteven when QoS is not enabled？（）

• A、QoS Element for Wireless Phones
• B、IGMP Snooping
• C、WMM
• D、AVVID Priority Mapping

第10题：