EGNE网关网元实现的载体是SNP
EGNE网关网元实现的载体是SOSCB/SOSC
GNE网关网元实现的载体是SOSCB/SOSC
EGNE监控的前提是EMS到EGNE网元的接入IP互通既可
第1题:
A.EGNE网关网元实现的载体是SNP
B.EGNE网关网元实现的载体是SOSCB/SOSC
C.GNE网关网元实现的载体是SOSCB/SOSC
D.EGNE监控的前提是EMS到EGNE网元的接入IP互通既可
第2题:
A.支持光监控信道,不支持电监控通道
B.网元内各个单板之间的通信通过IP方式实现
C.SPWA/B单板具有二层交换功能
D.SOSC当相当于一个路由器,并使用OSPF协议
第3题:
A.中兴Abis口设计包含IP层和TCP,UDP,Cudp
B.PPP是为了在同等单元之间传输数据包而设计的
C.cUDP是压缩的用户datagram协议
D.中兴Abis口设计中不包括TCP/IP协议
第4题:
中兴软交换系统中,TD网络中核心网和RNS之间的接口是Iu口,Iu口的承载介质是()
第5题:
中兴MX20系统EGNE和GNE说法不正确的是()
第6题:
A.NCP
B.SOSC
C.SPWA
D.SEIA
第7题:
Click the Exhibit button. In the DCN connection shown in the exhibit, all non-GNE nodes are located on different subnets from the GNE. There are no static routes or external OSPF on any elements. CTC Workstation and GNE have Cisco Router as their default gateway.Can the CTC workstation see the entire SONET network?()
A. Yes, but only if OSPF is enabled around the ring.
B. Yes, because the GNE will only serve as a proxy-ARP for elements on the same subnet.
C. Yes, but only if the router‘s address is entered as a static route in the non-GNE elements.
D. Yes, because the GNE will serve as a proxy-ARP for all elements, regardless of their subnets.
第8题:
A.既支持光监控信道,也支持电监控通道
B.网元内各个单板之间的通信通过IP方式实现
C.SPWA/B单板具有二层交换功能
D.SOSCB当相当于一个路由器,并使用OSPF协议
第9题:
中兴小型UPS系统设计给出的干节点告警信号一般为()和()。
第10题:
中兴组合电源系统可以接入环境监控单元是()。