Setup32.exe/apm
The power options in control panel
System event log
Apmstat -v command
Apmbios/show_all command
Display Properties
第1题:
You want to install Windows 2000 Professional on 20 new PXE compliant computers, which do not have operating systems installed. You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers cannot connect to the RIS server. You verify that existing client computers on the network can connect to network servers.
What should you do? (SELECT AND PLACE)
第2题:
You are the administrator of Ezonexam.com's network.
You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:
"Specified Port cannot be added. The port already exists."
You want to be able to use the new TCP/IP printer.
What should you do?
A.Modify the properties of the existing printer port to use the new print device.
B.Change the LPT port setting to bidirectional in the BIOS on your computer.
C.Change the LPT port setting to enable legacy Plug and Play detection on your computer.
D.Obtain and install the WDM-compliant device drivers and printing software for the printer.
第3题:
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.
What should you do?
A.When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
B.Disable the disk compression in Windows NT Workstation.
C.Install service pack four or later in Windows NT Workstation.
D.Install the distributed file system client on the Windows NT Workstation.
第4题:
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?()
第5题:
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?()
第6题:
You are the administrator for your company's network. The network is configured as shown in the exhibit.
You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.
You create a RIS image. You load the image onto the RIS server. You then start the new computers.
You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.
What should you do?
A.Add a Windows 2000 Server computer running WINS to the network.
B.Add a Windows 2000 Server computer running DHCP to the network.
C.Add the domain Everyone group to the RIS OS image security settings.
D.Place the new computers on the same segment as the RIS server.
第7题:
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do?()
第8题:
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.
Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.
You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?
A.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.
B.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.
C.Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.
D.Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
第9题:
As the administrator of your Windows 2000 corporate network you need to install Windows 2000 Professional on 88 computers, and you would like to do it with the least amount of administrative effort. You have 38 PXE-Compliant computers and 50 NON PXE-Compliant computers ready to go. You confirm that all 88 computers and their hardware are included on the current Windows 2000 hardware compatibility list (HCL).You create an RIS image and load it onto a Windows 2000 RIS Server. You then start the 88 computers. You find that the 38 PXE-Compliant computers connect fine to the RIS server, however the 50 NON PXE-Compliant computers cannot connect to the RIS server. What should you do to resolve this problem?()
第10题:
You are administering a Windows 2000 Professional, single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First, you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next?()