单选题While performing LVM maintenance， the volume group datavg1 was exported and re-imported.  The volume group is varied online， and the filesystems have been mounted. However， the database will not start.  What action would most likely resolve this proble

第1题：

An administrator is attempting to recover a filesystem that fails to manually unmount. The fsck command produces the following output： The current volume is： /dev/fslv02 File system is currently mounted.   Invalid file system size in the primary superblock. Invalid file system size in the secondary superblock.  Primary superblock is corrupt. Secondary superblock is corrupt.   fsck： 0507-018 Superblock is corrupt and cannot be repaired. Both primary and secondary copies are corrupt.Cannot continue tried to mount  Which steps will resolve the problem？（）

• A、Reboot the server into maintenance mode and run ‘fsck’ with the ‘-p’ parameter while the filesystem is mounted.
• B、Reboot the server into maintenance mode and run ‘fsck’ with the ‘-y’ parameter while the filesystem is unmounted.
• C、Force a umount of the filesystem with ‘umount -F /dev/fslv02’， and then run ‘fsck -p /dev/fslv02’ while the filesystem is unmounted.
• D、Force a umount of the filesystem by varying off the hosting volume group and then varyon the volume group. This will permit ‘fsck -y’ to be run against the failing filesystem.

第2题：

While performing LVM maintenance， the volume group datavg1 was exported and re-imported.  The volume group is varied online， and the filesystems have been mounted. However， the database will not start.  What action would most likely resolve this problem？（）  

• A、 Perform a shown command on the VG device files.
• B、 Perform a syncvg to validate VG integrity.
• C、 Perform a redfinevg to correct the VGDA state.
• D、 Perform a synchlvodm to correct the LV ownership.

第3题：

第4题：

During Company.com planning session， the LVM requirements for HACMP are provided. The administrator explains that there are five volume groups in the current production environment because filesystems constantly change due to the nature of the business. Maintenance outages are limited to one Saturday per month. There is some concern about the amount of time that will be required for outages once HACMP is installed.  With HACMP，what will be the simplest methods of managing LVM changes while minimizing required downtime.（）  

• A、 Make changes and allows Lazy Update to sync the changes later.
• B、 Use the Cluster Single Point Of Control to manage LVM changes.
• C、 Use exportvg on the primary node and improtvg on the second node.
• D、 Set up a local NFS cross-mount， and use the local filesystem until the outage.

第5题：

A system administrator is in the process of performing a preservation installation. However, the machine keeps booting up in diagnostic mode. Which of the following is the most probable cause?（）

• A、The battery on the machine is bad.
• B、The root volume group is corrupted.
• C、The low-level debugger is not enabled.
• D、There is a problem with the CD-ROM.

第6题：

While adding the forced varyon volume group option， it is decided to create a disk heartbeat  Network over the disk paths. Which HACMP function is used to create disk heartbeat devices？（）

• A、 The Disk hearbeat facility is initialized when creating enhanced concurrent mode volume groups through HACMP.
• B、 HACMP does not create the disk heartbeat area directly； RSCT facility creates the area used for the disk heartbeat when the device is started by Group Services.
• C、 The ’Chdev -v-C " command creates an enhanced Volume Group from an ordinarilyVolume Group. This creates the heartbeat region on the vfirst disk in the chain.
• D、 The disk heartbeat area on the disk is created and initialized when the device is created inHACMP "Extended Configuration -> Extended Topology -> Disk heartbeat facility" smit path.

第7题：

In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）

• A、extendvg
• B、cfgmgr
• C、reducevg
• D、varyoffvg

第8题：

An administrator has just imported a shred Volume Group that had been created on another  system in the cluster. In order for the shred volume to be used in the cluster， what is the most important step for the administrator to take first？（）   

• A、 Change the quorum required to false.
• B、 Change the Volume Group auto vary on to yes， and then vary off the Volume Group.
• C、 Change the auto vary on value of the Volume Group to no， and then vary off the volume group.
• D、 Set the Volume Group major number to the same value that the Volume Group had on the system on which it was created.

第9题：

With a scalable volume group, where is the logical volume control information stored on the disk?（）

• A、In the ODM
• B、In the volume group descriptor area
• C、In the first 512 bytes of the logical device
• D、In the first block of the user data within the LV

第10题：

An administrator is trying to extend an existing volume group with a new hard disk, but the extendvg command returns the following error. 0516-1162 /usr/sbin/extendvg. Warning, The Physical Partition Size of 64 requires the creation of 8924 partitions for hdisk11. The limitation for volume group datavg is 1016 physical partitions per physical volume. Use chvg command with -t option to attempt to change the maximum Physical Partitions per Physical volume for this volume group. The chvg -t may or may not allow the extendvg command to succeed. What is the implication of using this option?（）

• A、It reduces the maximum file size allowed within the given volume group.
• B、It reduces the maximum number of files allowed within the given volume group.
• C、It reduces the maximum number of logical volumes allowed within the given volume group.
• D、It reduces the maximum number of physical volumes allowed within the given volume group.