打环成功,路由器正常
路由器故障
协议故障
通信正常
第1题:
While logged into a router you manually shut down the serial 0 interface using the "shutdown" interface configuration command. You then issue the "show interface serial 0" command in exec mode. What could you expect the status of the serial 0 interface to be?()
A. Serial 0 is up, line protocol is up
B. Serial 0 is up, line protocol is down
C. Serial 0 is down, line protocol is down
D. Serial 0 is down, line protocol is up
E. Serial 0 is administratively down, line protocol is down
F. Serial 0 is administratively down, line protocol is up
第2题:
While logged into a router you manually shut down the serial 0 interface using the "shutdown" interface configuration command. You then issue the "show interface serial 0" command in exec mode. What could you expect the status of the serial 0 interface to be?()
第3题:
A.interface is down,line protocol is down
B.interface is down,line protocol is up
C.interface is up,line protocol is down
D.interface is up,line protocol is up
第4题:
TDCS中show interface命令查看路由器接口,如果显示Ethernet0 is up则表示()。
第5题:
如果执行了show interface serial 0命令而且出现了消息“Serial line is up,line protocol is up”,对于这条消息的正确解释是什么?()
第6题:
A.line down;line protocol down
B.line down;line protocol
C.line up;line protocol down
D.line up;line protocol up
第7题:
在路由器上运行了show int Ethernet 0命令后,提示Ethernet 0 is up line protocol is down,则表示()
第8题:
Which line from the output of the show ip interface command indicates that there is a Layer 1 problem?
A.Serial0/1 is up, line protocol is down
B.Serial0/1 is down, line protocol is down
C.Serial0/1 is up, line protocol is up
D.Serial0/1 is administratively down, line protocol is down
E.None of the above
第9题:
下列()状态是不可能在路由器的串行端口状态见到的。
第10题:
对协议转换器打()环,是指在BNC接头处使用环路连接收发接头设置的环路,属于物理环路。